Kent · England
Bath re-enamelling & resurfacing in Burmarsh, Kent
Problem with your bath in Burmarsh? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A roll-top that’s seen better days
Bath re-enamelling in Burmarsh, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the following day. We’re frequently asked to fix worn patches where water runs and sits and enamel that’s lost its shine and feels rough, on Victorian roll-tops, basins & shower trays and cast iron baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Burmarsh (TN29)
- Region
- Kent
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Burmarsh
Hard water speeds up the wear, and abrasive cleaners do the most damage.
People normally call us after spotting one of these:
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- A coating lifting around the plughole
Comparing quotes
- When it can be used again
- What prep work is covered
- What the guarantee covers, and for how long
- How your room will be protected
Burmarsh and the surrounding area
Burmarsh is about 4 miles south-west of Hythe, in Kent. Anywhere in TN29, a technician comes to you. We cover all 922 towns and villages across Kent. Our nearest city page is London, about 57 miles away.
Our visits in TN29 are booked in the same way as anywhere else. You’ll find streets such as Church Road, Painesfield Close and Thorndike Road, all of which we cover. Other places close to Burmarsh include Postling Green (3 miles north-west), St Mary's Bay (3 miles south), Newchurch (3 miles west), St Mary in the Marsh (3 miles south-west) and Aldington (4 miles north-west). Larger places within reach include Ashford (9 miles north-west), Dover (14 miles north-east), Folkestone (8 miles east), Hythe (4 miles north-east), Tower Hamlets (14 miles north-east) and Hawkinge (8 miles north-east).
Landmarks near Burmarsh
Our clients here include homes close to Church of All Saints and The Shepherd And Crook Public House and the streets around them. Burmarsh’s nearest station is Westenhanger station, roughly 3.7 miles north-east. Other landmarks nearby include Hythe Museum (4 miles east) and Lympne Castle (2 miles north-east).
FAQs for Burmarsh
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How much does bath re-enamelling cost in Burmarsh?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your TN29 postcode.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Nearby places to Burmarsh
More services for Burmarsh
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Avoid suction-cup mats
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Prices and what affects them
Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How much damage there is
- The colour and finish to match
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
Before you send photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- One picture of the entire bath
To get a price, send a couple of pictures through our quote form or ring us. We will say straight away whether it can be repaired.
When we would advise against a repair
A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Open a window if you can
- Ensure the area is dry
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
For landlords and businesses
For anyone letting property in or around Burmarsh, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
We work for landlords, letting agents and housing providers in Burmarsh as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
