Cambridgeshire · England
Bath re-enamelling & resurfacing in Newton, Cambridgeshire
Bath re-enamelling for Newton, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
About our bath re-enamelling in Newton
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our technicians work on basins & shower trays, pressed steel baths and acrylic baths, and common reasons people contact us are an old resurfacing that’s failing and worn patches where water runs and sits.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Newton (CB22)
- County
- Cambridgeshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Newton
If you manage property in Newton, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Also near Newton
What else we do in Newton
Prices and what affects them
Prices start from £350. You won’t pay by the hour. The price is based on:
- Previous DIY repairs that have to come out
- What the surface is made of
- Whether we combine several jobs
- Access to the area
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Getting a price from photos
Most quotes are done from pictures alone. To help us price it:
- Good light, ideally daylight, without flash glare
- Any details about the material
- One picture of the whole bath
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Signs you need bath re-enamelling in Newton
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
If you can see any of these, send us a photo:
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- Staining under the taps and around the waste
Before booking anyone
- If travel is included in the price
- How soon you can use it again
- What preparation is included
- How the room is protected while they work
What we can’t put right
It helps to know what we can’t do:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
How to care for the repair
After the repair has cured, a few habits help it last:
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
- Never use suction bath mats
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Read more
FAQs for Newton
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
What areas do you cover?
Everywhere in the UK, Newton included. There is no extra charge for travel.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Where we work around Newton
Newton is about 6 miles south of Cambridge, in Cambridgeshire. Anywhere in CB22, we come to you. Newton is one of 371 towns and villages in Cambridgeshire we cover. We work right across the region, from Newton to London (44 miles away).
We cover every part of the CB22 postcode area. We regularly work on streets such as Coach House Lane, Town Street and Harston Road and the roads around them. We also cover the places around Newton: Harston (1 mile north-west), Foxton (2 miles west), Barrington (3 miles west), Haslingfield (3 miles north-west) and Shepreth (3 miles west). Within a short drive, we also cover Cambridge (6 miles north), Newmarket (15 miles north-east), Royston (7 miles south-west), Cambourne (10 miles north-west), King's Hedges (7 miles north) and Arbury (7 miles north).
Landmarks near Newton
Locally, our jobs take us to homes close to Bottisham Village College, Church of St Margaret and The Queens Head Public House, among other places. The closest station to Newton is Foxton station, about 1.8 miles west of the centre. Other landmarks nearby include American Air Museum (2.5 miles south-east) and Fowlmere Castle (2.4 miles south-west). For a walk, there is Rowley's Hill and Fowlmere RSPB reserve.
About our accreditations · Every repair comes with a one-year guarantee.
