Lancashire · England
Bath Re-enamelling in Newton-with-Scales
Full bath re-enamelling and resurfacing for homes and businesses in Newton-with-Scales and across Lancashire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
Bath re-enamelling at your home in Newton-with-Scales
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Our repair technicians work on pressed steel baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are lots of chips and rust spots and a bath in a colour that no longer suits.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Newton-with-Scales (PR4)
- Region
- Lancashire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Newton-with-Scales
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
Questions to ask before booking
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- Who will actually do the work
For landlords and businesses
We work for landlords, letting agents and housing providers in Newton-with-Scales as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Towns and villages near Newton-with-Scales
More services for Newton-with-Scales
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why us?
- One price list for the whole UK
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
Read our full price list or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We take into account:
- Access to the area
- The material
- Unusual colours or finishes
- How much damage there is
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Something in shot to show the size
- A wider photo showing the whole bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
FAQs for Newton-with-Scales
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How do I get a price for bath re-enamelling in Newton-with-Scales?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Lancashire.
Can you quote from pictures?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Do you resurface freestanding baths?
Yes. Inside and out.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Do not leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
How to get a price
Email us a picture of the damage and a wider shot of the entire item, and tell us you’re in Newton-with-Scales, and we will reply with a fixed quote.
Related advice
Newton-with-Scales and the surrounding area
Newton-with-Scales is about 5 miles west of Fulwood, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 482 towns and villages in Lancashire. Our nearest city page is Liverpool, about 25 miles away.
All of PR4 is covered. From Beech Drive, Lowfield Close and Yew Tree Close or anywhere nearby, a technician can come to you. We also cover the places around Newton-with-Scales: Clifton (1 mile east), Treales (1 mile north), Salwick (1 mile north-east), Hall Cross (1 mile west) and Freckleton (2 miles south-west). Further out, we also cover Preston (6 miles east), Chorley (12 miles south-east), Lytham St Anne's (7 miles west), Bamber Bridge (8 miles south-east), Leyland (8 miles south-east) and Fulwood (5 miles east).
Around Newton-with-Scales
Typical jobs here are in homes near Newton Bluecoat Church of England Primary School, Carr Hill High School and Sixth Form Centre and St John the Evangelist's Church. Newton-with-Scales’s nearest station is Salwick station, roughly 1.1 miles north-east of the centre. Other landmarks nearby include Lytham Hospital (5 miles south-west) and Preston Castle (4.5 miles east).
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
