Lancashire · England
Bath re-enamelling & resurfacing in Kirkham, Lancashire
Damaged bath in Kirkham? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A roll-top that is seen better days
About our bath re-enamelling in Kirkham
We don’t move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Whether it’s a bath that stays dull however much you clean it and several chips and rust patches, we can normally put it right, whatever the material.
All our work comes with our one-year guarantee.
- Location
- Kirkham (PR4)
- Area hub
- Lancashire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the day after. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- One price list for the whole UK
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
- Most jobs done in one visit
Take a look at our pricing or bath cost comparison.
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Nearby places to Kirkham
Other services in Kirkham
For landlords and businesses
If you manage property in Kirkham, we’ll quote for several properties at once. Send photos for each one and we will price them together.
Landlords, letting agents and housing providers in Kirkham use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Where we work around Kirkham
Kirkham is about 6 miles east of Lytham St Anne's, in Lancashire. Jobs in Kirkham are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover 482 places in Lancashire, from the larger towns to small villages. Our nearest city page is Liverpool, about 26 miles away.
We work across the PR4 postcode area and the streets around it. From Station Road, Moor Street and Crown Mews or anywhere nearby, we can come to you. Main roads around Kirkham include the A583 and B5192, which makes travel easy. Nearby, we also work in Wesham (1 mile north-west), Ribby (1 mile west), Hall Cross (1 mile south), Treales (1 mile east) and Newton-with-Scales (2 miles south-east). Further out, we also cover Preston (8 miles east), Chorley (14 miles south-east), Lytham St Anne's (6 miles west), Bamber Bridge (10 miles south-east), Leyland (10 miles south-east) and Fulwood (7 miles east).
Near you in Kirkham
We visit homes around Railway Hotel, Kirkham and Wesham Primary School and Kirkham United Reformed Church. Kirkham has its own railway station: Kirkham & Wesham station. Nearby you’ll also find Lytham Hospital (4.2 miles south-west) and Lytham Motive Power Museum (3.8 miles south-west).
Kirkham questions
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How it works
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. It normally takes most of the day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Do you need bath re-enamelling in Kirkham?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
If you can see any of these, send us a picture:
- Worn patches where water runs and sits
- An old resurfacing that’s failing
- A coloured bath you want in white
- Staining under the taps and around the waste
What your quote should include
- What protection goes down before work starts
- When it can be used again
- Who will actually do the work
- What happens if they find more damage
Looking after it afterwards
Once the work has cured, treat it gently:
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
