Herefordshire · England
Bath re-enamelling & resurfacing in Nokelane Head, Herefordshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Nokelane Head. Free, fixed quotes from your photos.
- Resurfacing from £350
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
Where we work around Nokelane Head
Nokelane Head is about 15 miles north-west of Hereford, in Herefordshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Nokelane Head is one of 255 towns and villages in Herefordshire we cover. Our nearest city page is Birmingham, about 47 miles away.
Our visits in HR6 work the same way as everywhere else we cover. Other places close to Nokelane Head include Cabal (1 mile south-west), Marston (1 mile south), Pembridge (2 miles south-east), Titley (2 miles west) and Bearwood (2 miles south-east). We also work in nearby towns such as Hereford (15 miles south-east), Leominster (8 miles east), Whitecross (15 miles south-east), Widemarsh (15 miles south-east), Kington (5 miles south-west) and Aylestone Hill (15 miles south-east).
Landmarks near Nokelane Head
Around Nokelane Head, we work in homes near Church of St Peter and the streets around them. A little further out are Sidney Nolan Trust Gallery (3.3 miles north-west) and Cabal Tump (1.4 miles south-west). Green spaces nearby include Titley Pool and Titley Pool.
How we handle bath re-enamelling in Nokelane Head
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We’re often asked to fix enamel that’s lost its shine and feels rough and a coating lifting around the plughole, in acrylic baths, Victorian roll-tops and cast iron baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Area
- Nokelane Head (HR6)
- Region
- Herefordshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Nokelane Head
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Look out for any of the following:
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Comparing quotes
- What happens if they find more damage
- How to look after the finish
- If travel is included in the price
- How the room is protected while they work
Repair or replace in Nokelane Head?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Why book with us
- We will tell you if it’s not worth repairing
- Everything repaired in place
- Every repair guaranteed for a year
- A fixed quote before booking
See our prices page or bath cost comparison.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Nokelane Head, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Other services in Nokelane Head
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- Leaks from fittings rather than the bath
- A bath split right through the body
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Keep a parking space free if you can
- Let the surface dry out before the visit
- Open a window if you can
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Advice
FAQs for Nokelane Head
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you work in Nokelane Head?
We do. We send a technician to Nokelane Head for every job, with no extra charge for travel.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- Previous DIY repairs that have to come out
- The material and finish
- Access to the area
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from photos
You can take the photos on your phone. Just ensure we can see:
- A clear, close picture of the problem area
- Any details about the material
- Natural light rather than flash
- One picture of the whole bath
Most clients in Nokelane Head get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
