Herefordshire · England
Bath re-enamelling & resurfacing in Marston, Herefordshire
Full bath re-enamelling and resurfacing for homes and businesses in Marston and across Herefordshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
Bath re-enamelling in Marston without replacing anything
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. We are frequently asked to fix chips and rust in more than one place and an outdated colour you’d like to change, on cast iron baths, Victorian roll-tops and pressed steel baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Marston (HR6)
- Area hub
- Herefordshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Marston
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- The colour and finish to match
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
Two or three clear pictures are normally enough. It helps if you send:
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- A clear, close picture of the problem area
- Something in shot to show the size
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Marston and nearby
Marston is about 14 miles north-west of Hereford, in Herefordshire. From the centre of Marston to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 255 places across Herefordshire, from the larger towns to small villages. We work right across the region, from Marston to Birmingham (47 miles away).
We cover every part of HR6. Other places close to Marston include Nokelane Head (1 mile north), Cabal (1 mile north-west), Moorcot (1 mile south), Bearwood (1 mile south-east) and Pembridge (2 miles east). Further out, we also cover Hereford (14 miles south-east), Leominster (8 miles east), Redhill (15 miles south-east), Newton Farm (15 miles south-east), Whitecross (14 miles south-east) and Eign Hill (15 miles south-east).
Landmarks near Marston
Locally, our jobs take us to homes close to St Mary's Church, among other places. Nearby you will also find Cabal Tump (1.3 miles north-west). Not far away are Titley Pool and Rushock Hill.
Common questions in Marston
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
How much does bath re-enamelling cost in Marston?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Open a window if you can
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Common problems we fix in Marston
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The things customers generally mention when they call include:
- Worn patches where water runs and sits
- Lots of chips and rust spots
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Before booking anyone
- How soon you can use it again
- Aftercare advice
- How the colour is matched
- Whether the price covers travel
Work for landlords and builders
If you manage property in Marston, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What we can’t put right
A repair isn’t right for every job, including:
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Materials we work on in Marston
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
More services for Marston
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
- Do not leave a chip unrepaired
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
