Lancashire · England
Bath Re-enamelling in Norbreck
We travel to Norbreck for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
Where we work around Norbreck
Norbreck is about 2 miles south-west of Thornton, in Lancashire. Wherever you are in the FY5 postcode area, a technician comes to you. We work in 482 places across Lancashire, from the larger towns to small villages. We work right across the region, from Norbreck to Liverpool (about 32 miles away).
Jobs in FY5 and FY2 are booked in the same way as anywhere else. Jobs here include addresses on Shore Road, Haddon Road and Kelvin Road. With the A587 close by, Norbreck is easy for our repair technicians to reach. Other places close to Norbreck include Little Bispham (1 mile north-west), Bispham (1 mile south), Anchorsholme (1 mile north-east), Cleveleys (1 mile north) and Carleton (2 miles south-east). Larger places within reach include Lytham St Anne's (8 miles south), Fulwood (14 miles east), Fleetwood (4 miles north), Penwortham (15 miles south-east), Heysham (14 miles north-east) and Poulton-le-Fylde (3 miles south-east).
Around Norbreck
We visit homes around Westcliff Primary Academy, Norbreck Primary Academy and Montgomery High School. You’ll also find Bispham Parish Church (under half a mile south-east), Devonshire Road Rock Gardens (0.9 miles south) and The Jolly Tars pub (1 mile north). The closest station to Norbreck is Layton station, about 1.9 miles south. A little further out are Bispham Hospital (0.9 miles east) and Showtown (3.3 miles south). The countryside around Norbreck includes Marton Mere.
Bath re-enamelling in Norbreck without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you are dealing with brown or grey marks that don’t clean off and worn patches where water runs and sits, we can normally put it right, on acrylic baths, pressed steel baths and Victorian roll-tops alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Area
- Norbreck (FY5, FY2)
- County
- Lancashire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
The process
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Getting a price
To get a price, send two or three photos through our quote form or call us. We will say straight away whether it can be repaired.
Read more
Norbreck: your questions answered
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Nearby places to Norbreck
What else we do in Norbreck
Honest limits
In fairness, some problems need a different fix:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Send us pictures and we will tell you honestly.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Landlord and trade work in Norbreck
Housing associations and facilities teams use us for planned and reactive repairs in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Do you need bath re-enamelling in Norbreck?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a picture:
- An old resurfacing that’s failing
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- Stains that won’t shift
What your quote should include
- Whether the price covers travel
- What aftercare is recommended
- How long it needs to cure
- What happens if they find more damage
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Norbreck. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Every repair guaranteed for a year
- No need to remove anything
- Rooms protected and left tidy
- No extra charge for your area
Take a look at our full price list or resurfacing vs replacement cost guide.
Keeping it looking good
Aftercare is simple:
- Never use suction bath mats
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Do not let dyes or oils sit on the finish
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
