Hampshire · England
Bath Re-enamelling in Norleywood
Our technicians come to Norleywood for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Repairing versus replacing in Norleywood
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- A fixed quote before you book
- Colours mixed by hand to suit your surface
- Work done at your home or business
- Same prices wherever you are
Take a look at our pricing and resurfacing vs replacement cost guide.
About our bath re-enamelling in Norleywood
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include several chips and rust patches and worn patches where water runs and sits, in pressed steel baths, cast iron baths and acrylic baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Norleywood (SO41)
- Region
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let us know about parking or access
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
Ask for a price
Email us a picture of the damage and a wider shot of the entire item, and tell us you are in Norleywood, and we will reply with a fixed price.
Read more
What we cannot put right
In fairness, there are a few things a repair will not fix:
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Norleywood
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What else we do in Norleywood
Common problems we fix in Norleywood
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Customers typically contact us about:
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- Stains that won’t shift
- A bath that stays dull however much you clean it
Before booking anyone
- Whether there are any call-out or travel charges
- Who will actually do the work
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
Prices and what affects them
Prices start from £350. You will know the full cost before booking. We take into account:
- Unusual colours or finishes
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- The material and finish
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- One picture of the whole bath
- Natural light rather than flash
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Our work in Norleywood
Norleywood is about 3 miles north-east of Lymington, in Hampshire. Jobs in Norleywood are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Our repair technicians cover all 683 towns and villages across Hampshire, from the larger towns to small villages. You can also see our page for London, about 79 miles away.
Our repair technicians cover all of the SO41 postcode area and the streets around it. Jobs here include addresses on Norleywood Road, Joys Lane and Thatchers Lane and the roads around them. We also cover the places around Norleywood: East End (1 mile south-east), Thorns Beach (3 miles east), Hamstead (5 miles south-east), Bouldnor (5 miles south) and Yarmouth (5 miles south). We also work in nearby towns such as Gosport (15 miles east), Eastleigh (15 miles north-east), Fareham (14 miles east), Totton (10 miles north), Chandler's Ford (15 miles north) and Hedge End (13 miles north-east).
Landmarks near Norleywood
Around Norleywood, we work in homes near Church of St Mary and South Baddesley Church of England Primary School, among other places. Norleywood’s nearest station is Lymington Pier station, about 2 miles south-west of the centre. Other landmarks nearby include St Barbe Museum and Art Gallery (2.4 miles south-west) and Lymington New Forest Hospital (2.3 miles west). Green spaces nearby include Boldre Foreshore.
For landlords and businesses
If you manage property in Norleywood, we will quote for several properties at once. Just send pictures for each address and we will price them together.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Questions from Norleywood
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do you come to Norleywood?
We do. Technicians travel to Norleywood from across the region, and the price is the same as everywhere else.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Looking after it afterwards
Once the work has cured, treat it gently:
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Do not leave bottles, razors or sponges standing on the surface
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
