Rutland · England
Bath re-enamelling & resurfacing in Normanton, Rutland
Fixed-price bath re-enamelling in Normanton and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
What affects the price in Normanton
Prices start from £350. There’s no charge for travel to Normanton. The price comes down to:
- The size and number of damaged areas
- The material
- Access to the area
- Whether it’s a chip, crack, burn or wear
A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Natural light rather than flash
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- A wider photo showing the whole bath
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Bath re-enamelling at your home in Normanton
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on pressed steel baths, Victorian roll-tops and acrylic baths, and the jobs we see most are a peeling or bubbling previous coating and chips and rust in more than one place.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Normanton (LE15)
- Region
- Rutland
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Covering Normanton
Normanton is about 5 miles east of Oakham, in Rutland. Our repair technicians come to homes and businesses in Normanton and nearby villages, so nothing has to leave your home. We work in all 47 towns and villages across Rutland. Our jobs stretch from Normanton to Birmingham (about 55 miles away).
We cover every part of the LE15 postcode area and the streets around it. If you are just outside Normanton, we cover Edith Weston (1 mile south-west), Whitwell (2 miles north-west), North Luffenham (2 miles south), Lyndon (2 miles south-west) and Pilton (2 miles south-west). Larger places within reach include Oakham (5 miles west), Uppingham (6 miles south-west), Barleythorpe (6 miles north-west), Cottesmore (5 miles north), Langham (7 miles north-west) and Whissendine (8 miles north-west).
Around Normanton
Locally, our jobs take us to homes close to Edith Weston Academy and Former Church of St Matthew and the streets around them. A little further out are Burley Castle (4.4 miles north-west) and Normanton Church Museum (less than half a mile north-west). Open spaces near Normanton include Collyweston Quarries.
Normanton: your questions answered
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Do you come to Normanton?
Yes, we do. We send a technician to Normanton for every job, and the price is the same as everywhere else.
What happens next?
We come back with a fixed quote. You’re under no obligation.
Which areas do you work in?
Everywhere in the UK, Normanton included. Travel is included in the price.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What we’re called out for in Normanton
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for any of the following:
- Wear marks under the taps
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
Before booking anyone
- When it can be used again
- How to look after the finish
- What happens if they find more damage
- Whether cleaning and preparation are in the price
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take a full day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
How to get a price
Most customers in Normanton get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Also near Normanton
Also in Normanton
Landlords, agents and businesses in Normanton
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Repair or replace in Normanton?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your photos
- One-year guarantee on every repair
Read our pricing or resurfacing vs replacement cost guide.
What we can’t put right
It helps to know what we can’t do:
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
