Bristol · England

Bath Re-enamelling for North Fringe of Bristol homes

Full bath re-enamelling and resurfacing for householders, landlords and businesses in North Fringe of Bristol. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near North Fringe of Bristol

Bath re-enamelling in North Fringe of Bristol, done in place

When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s an old resurfacing that’s failing and a bath that stays dull however much you clean it, we can help.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Where
North Fringe of Bristol (BS34, BS32)
County
Bristol
Warranty
One year on every repair
Quotes
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Prices and what affects them

Prices start from £350. There is no area surcharge for North Fringe of Bristol. The price reflects:

  • Previous DIY repairs that have to come out
  • The size and number of damaged areas
  • How many items we do on one visit
  • How easy the damage is to reach

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what helps:

  • Natural light rather than flash
  • Whether it’s been repaired or coated before
  • A wider photo showing the whole bath
  • What it’s made of, if you know

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Honest limits

We will not take on work that won’t last, so here’s what a repair can’t put right:

  • An acrylic bath that flexes badly underfoot
  • Steel that has corroded right through
  • Damage hidden under a previous coating, until it’s stripped back

Send us pictures and we will tell you honestly before you book.

Surfaces we repair

  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Repair or replace: which is better?

If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • Fixed prices from your pictures
  • We leave the room as we found it
  • Colour-matched on site
  • Every repair guaranteed for a year

Read our full price list or guide to resurfacing and replacement costs.

North Fringe of Bristol questions

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Can you repair something that’s been repaired before?

Generally, yes. The old repair comes out first, so mention it when you send pictures.

Do you cover North Fringe of Bristol?

We do. Repair technicians travel to North Fringe of Bristol from across the region, and the price is the same as everywhere else.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Can you make a coloured bath white?

Yes, white is the usual choice. Mention the colour you want when you send photos.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your BS34 postcode.

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

North Fringe of Bristol and nearby

North Fringe of Bristol is about 1 mile south-east of Patchway, in Bristol. Across the BS34 area, we come to you. North Fringe of Bristol is one of 89 towns and villages in Bristol where we work. Our jobs stretch from North Fringe of Bristol to Birmingham (about 71 miles away).

Here we cover the BS34 and BS32 postcode area. Whether you live on The Avenue, Station Road and Buckleys Road or anywhere nearby, we can come to you. Neighbouring places we cover include Little Stoke (1 mile east), Stoke Lodge (1 mile east), Patchway (1 mile north-west), Bradley Stoke (1 mile north-east) and Filton (1 mile south). Larger places within reach include Bristol (5 miles south), Montpelier (4 miles south), Easton (5 miles south), Bedminster (6 miles south), Cotham (4 miles south) and Canon's Marsh (5 miles south).

Landmarks near North Fringe of Bristol

Typical jobs here are in homes near Patchway Community College, Three Brooks Local Nature Reserve and Holy Family Catholic Primary School, among other places. There’s a railway station in North Fringe of Bristol itself: Patchway station. A little further out are The Mall (1.2 miles west) and Southmead Hospital (2.3 miles south-west). Open spaces near North Fringe of Bristol include Purdown and Tarn Lake.

Map of North Fringe of Bristol © OpenStreetMap contributors

Aftercare tips

After the repair has cured, a few habits help it last:

  • Rinse off hair dye, oils and bath bombs immediately
  • Fix dripping taps quickly
  • Don’t leave a chip unrepaired
  • Stick to gentle, non-abrasive cleaners

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.

On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.

What we are called out for in North Fringe of Bristol

Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.

Look out for these signs:

  • Worn patches where water runs and sits
  • Lots of chips and rust spots
  • A coating lifting around the plughole
  • Brown or grey marks that don’t clean off

Questions to ask before booking

  • Whether cleaning and preparation are in the price
  • If travel is included in the price
  • Whether the price is fixed and includes VAT
  • How changes to the job are handled

10 questions to ask before you book

How the visit works

We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes a full day in most cases. The room is left tidy and ready to use once it has cured.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Ensure the room can be ventilated
  • Point us to the nearest place to park

Getting a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.