Herefordshire · England
Bath Re-enamelling for Norton Canon homes
Full bath re-enamelling and resurfacing at your home in Norton Canon, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coating lifting around the plughole

Landlords, agents and businesses in Norton Canon
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling in Norton Canon without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include several chips and rust patches and worn patches where water runs and sits, across cast iron baths, acrylic baths and pressed steel baths.
Big or small, you get the same one-year guarantee.
- Location
- Norton Canon (HR4)
- Region
- Herefordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026

What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- Unusual colours or finishes
- How much damage there is
- The material
- The type of damage
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Any details about the material
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Common questions in Norton Canon
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Do you come to Norton Canon?
Yes, we do. Repair technicians travel to Norton Canon from across the region, with no extra charge for travel.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Also near Norton Canon
Also in Norton Canon
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Straight answers about what a repair can do
- A year’s guarantee on all work
See our pricing and guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Norton Canon
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- A bath in a colour that no longer suits
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
- Stains that won’t shift
Questions to ask before you book
- How soon you can use it again
- What happens if they find more damage
- What the guarantee covers, and for how long
- Whether a trained technician does the job
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
How it works
Arrival times are agreed in advance. On site, it takes a full day for most jobs. We leave the room clean.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Where we work around Norton Canon
Norton Canon is about 9 miles north-west of Hereford, in Herefordshire. From the centre of Norton Canon to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 255 places across Herefordshire, from the larger towns to small villages. Our jobs stretch from Norton Canon to Birmingham (49 miles away).
Our repair technicians cover all of HR4 and the streets around it. If you are just outside Norton Canon, we cover Calver Hill (1 mile north-west), Norton Wood (1 mile west), Sallys (2 miles north-west), Staunton on Wye (2 miles south-west) and Logaston (3 miles north-west). Larger places within reach include Hereford (9 miles south-east), Leominster (10 miles north-east), Redhill (10 miles south-east), Newton Farm (10 miles south-east), Whitecross (9 miles south-east) and Eign Hill (10 miles south-east).
What’s near Norton Canon
In Norton Canon, that means homes near Weobley High School and Church of St Nicholas and the streets around them. Well-known places in the area include Weobley Museum (2.5 miles north-east) and Kinnersley Castle (2.3 miles north-west). Not far away are Garnons Hill.
How to care for the repair
After the repair has cured, a few habits help it last:
- Do not leave a chip unrepaired
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.

