Herefordshire · England
Bath Re-enamelling in Sallys
We travel to Sallys for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An old resurfacing that is failing
- Thin, worn enamel in places
Bath re-enamelling in Sallys without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair acrylic baths, pressed steel baths and Victorian roll-tops, and the jobs we see most are brown or grey marks that don’t clean off and an original cast iron bath that needs restoring.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Sallys (HR3)
- Area hub
- Herefordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the following day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Related advice
Nearby places to Sallys
More services for Sallys
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common questions in Sallys
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you work in Sallys?
We do. Repair technicians travel to Sallys from across the region, and the price is the same as everywhere else.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Signs you need bath re-enamelling in Sallys
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Clients generally contact us about:
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- A bath in a colour that no longer suits
What to look for in a quote
- Who turns up on the day
- A fixed quote, and whether VAT is included
- When it can be used again
- What preparation is included
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Sallys as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For anyone letting property in or around Sallys, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Covering Sallys
Sallys is about 11 miles north-west of Hereford, in Herefordshire. We visit homes and businesses in Sallys, so nothing has to leave your home. Sallys is one of 255 places in Herefordshire we cover. Our jobs stretch from Sallys to Birmingham (about 50 miles away).
Here we cover the HR3 postcode area. Neighbouring places we cover include Logaston (1 mile north-west), Norton Wood (1 mile south-east), Calver Hill (1 mile south-east), Woonton (1 mile north) and Hopley's Green (2 miles north-west). Further out, we also cover Hereford (11 miles south-east), Leominster (10 miles north-east), Redhill (12 miles south-east), Newton Farm (11 miles south-east), Whitecross (11 miles south-east) and Eign Hill (12 miles south-east).
Around Sallys
Around Sallys, we work in homes near St James's Church, among other places. Well-known places in the area include Weobley Museum (3 miles east) and Kinnersley Castle (0.7 miles south-west). Not far away are Birches Farm and Garnons Hill.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- The size and number of damaged areas
- Unusual colours or finishes
- How many items we do on one visit
- The material and finish
We charge the same wherever you are, with no extra for Sallys. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- The material, if you know it
- Your postcode, so we can check dates
- A picture taken from further back
To get a price, send a couple of pictures through our quote form or call us. We will say immediately if a repair is the right fix.
Repair or replace: which is better?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Sallys clients choose us
- A fixed quote before you book
- Most jobs done in one visit
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
Read our full price list or bath cost comparison.
Aftercare tips
So the finish stays in good condition for years:
- Avoid suction-cup mats
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
