Herefordshire · England
Bath re-enamelling & resurfacing in Norton Wood, Herefordshire
Bath re-enamelling for Norton Wood, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A roll-top that is seen better days
Bath re-enamelling in Norton Wood without replacing anything
If your bath is sound but looks tired, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. If you’re dealing with a roll-top that’s seen better days and an old resurfacing that’s failing, we can help, on acrylic baths, pressed steel baths and cast iron baths alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Norton Wood (HR4)
- County
- Herefordshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Norton Wood: your questions answered
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Aftercare tips
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Get any chip repaired quickly
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The colour and finish to match
- The material
- How many areas need work
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.
How to get a fixed quote
Two or three clear photos are generally enough. Try to include:
- The material, if you know it
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- One picture of the entire bath
Most customers in Norton Wood get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What we cannot put right
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly before you book.
Materials we work on in Norton Wood
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Our work in Norton Wood
Norton Wood is about 10 miles north-west of Hereford, in Herefordshire. Jobs in Norton Wood are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Norton Wood is one of 255 places in Herefordshire we cover. You can also see our page for Birmingham, about 50 miles away.
Jobs in HR4 work the same way as everywhere else we cover. Other places close to Norton Wood include Calver Hill (1 mile east), Norton Canon (1 mile east), Sallys (1 mile north-west), Staunton on Wye (2 miles south) and Logaston (2 miles north-west). Within a short drive, we also cover Hereford (10 miles south-east), Leominster (10 miles north-east), Redhill (11 miles south-east), Newton Farm (10 miles south-east), Whitecross (10 miles south-east) and Eign Hill (11 miles south-east).
Local landmarks in Norton Wood
In Norton Wood, that means homes near Church of St Nicholas, among other places. Other landmarks nearby include Kinnersley Castle (1.4 miles north-west) and Weobley Museum (3.1 miles north-east). Green spaces nearby include Garnons Hill.
Places near Norton Wood
Also in Norton Wood
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Common problems we fix in Norton Wood
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Keep an eye out for any of the following:
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
- A period or roll-top bath worth keeping
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- How the colour is matched
- Whether a trained technician does the job
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a full day for most jobs. The room is left tidy and you will know when it can be used.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Have a window or extractor fan available
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
