Nottinghamshire · England
Bath Re-enamelling in Norwell
Bath re-enamelling across Norwell and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coloured bath you want in white
About our bath re-enamelling in Norwell
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair Victorian roll-tops, pressed steel baths and basins & shower trays, and the jobs we see most are an outdated colour you’d like to change and wear marks under the taps.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Where
- Norwell (NG23)
- County
- Nottinghamshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Norwell?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before you book.
Why book with us
- Honest advice, even when it means no job
- Technicians who travel to you, UK-wide
- CHAS and Constructionline accredited
- Same prices wherever you are
Read our full price list and bath cost comparison.
Places near Norwell
Also in Norwell
Questions from Norwell
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
When a repair is not the answer
Some jobs aren’t right for a repair, for example:
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
Send us pictures and we will tell you honestly before booking.
What we work on
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which generally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
What we are called out for in Norwell
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
People generally call us when they notice one of these:
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
- Chips and rust in more than one place
What your quote should include
- What prep work is covered
- How your room will be protected
- Is the price fixed, and does it include VAT?
- How to look after the finish
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Leave the bath for the full curing time before using it
- Have chips seen to early
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Norwell and nearby
Norwell is about 5 miles north of Newark-on-Trent, in Nottinghamshire. Jobs in Norwell are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Norwell is one of 329 places in Nottinghamshire where we work. We work right across the region, from Norwell to Leeds (54 miles away).
We cover every part of NG23 and the streets around it. From Foxhall Close, Willoughby Court and Moorlands Close or a nearby road, a technician can come to you. We also cover the places around Norwell: Bathley (2 miles south), Cromwell (2 miles east), Caunton (2 miles south-west), Ossington (2 miles north-west) and Carlton-on-Trent (2 miles north-east). We also work in nearby towns such as Mansfield (14 miles west), Newark-on-Trent (5 miles south), Retford (13 miles north), Mansfield Woodhouse (14 miles west), Forest Town (13 miles west) and Bingham (14 miles south).
Around Norwell
In Norwell, that means homes near St. Laurence's Church and Norwell CofE Primary School and the streets around them. The closest station to Norwell is Collingham station, roughly 4.1 miles east. A little further out are Laxton Castle (4.8 miles north-west) and Newark Hospital (5.8 miles south).
What affects the price in Norwell
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- How many areas need work
- The material
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- The material, if you know it
- One picture of the whole bath
Most customers in Norwell get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
