Nottinghamshire · England
Bath Re-enamelling for Cromwell homes
Full bath re-enamelling and resurfacing for homes and businesses in Cromwell and across Nottinghamshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Wear marks under the taps
- Staining under the taps and around the waste
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Bath re-enamelling in Cromwell, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with lots of chips and rust spots and a coloured bath you want in white, we can typically put it right, on Victorian roll-tops, pressed steel baths and cast iron baths alike.
All our work comes with a one-year guarantee, wherever you are in Nottinghamshire.
- Area
- Cromwell (NG23)
- County
- Nottinghamshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
When to call us in Cromwell
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Common reasons people in Cromwell contact us are:
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- Several chips and rust patches
- A dull, rough surface that won’t come clean
What to look for in a quote
- How long it needs to cure
- What prep work is covered
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Cromwell. The price reflects:
- How much damage there is
- How easy the damage is to reach
- Whether we combine several jobs
- How hard the colour is to match
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- A wider photo showing the entire bath
- Where you are, by postcode
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Questions from Cromwell
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Honest limits
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before you book.
Materials we work on in Cromwell
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Towns and villages near Cromwell
Other services in Cromwell
How to look after the repair
How the surface is treated afterwards matters:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Get any chip repaired quickly
- Store bottles off the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Where we work around Cromwell
Cromwell is about 5 miles north of Newark-on-Trent, in Nottinghamshire. Anywhere in NG23, a technician comes to you. Cromwell is one of 329 towns and villages in Nottinghamshire where we work. Our nearest city page is Leeds, about 55 miles away.
All of NG23 is covered, from the main roads to the quietest streets. Whether you live on Great North Road and Church Lane or anywhere nearby, a technician can come to you. Other places close to Cromwell include Carlton-on-Trent (2 miles north), Holme (2 miles south), North Muskham (2 miles south), Norwell (2 miles west) and Bathley (2 miles south-west). We also work in nearby towns such as Newark-on-Trent (5 miles south), Retford (13 miles north-west), Forest Town (15 miles west), Bingham (15 miles south-west), Market Warsop (15 miles west) and Balderton (6 miles south).
What’s near Cromwell
Locally, our jobs take us to homes close to St. Giles' Church, among other places. The nearest railway station is Collingham station, roughly 2.4 miles east of the centre. Other landmarks nearby include Vinas Dolls Gallery (under half a mile north-east) and Newark Castle (4.8 miles south).
About our accreditations · Every repair comes with a one-year guarantee.
