Wolverhampton · England
Bath re-enamelling & resurfacing in Nurton, Wolverhampton
We travel to Nurton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
Bath re-enamelling in Nurton, done in place
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Common call-outs are for a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, across acrylic baths, Victorian roll-tops and basins & shower trays.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Where
- Nurton (WV6)
- Region
- Wolverhampton
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
If you manage property in Nurton, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Repairing versus replacing in Nurton
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- Work done at your home or business
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- We will tell you if it’s not worth repairing
Take a look at our full price list and resurfacing vs replacement cost guide.
What we are called out for in Nurton
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
The most common problems we are called about are:
- Brown or grey marks that don’t clean off
- A roll-top that’s seen better days
- An old resurfacing that’s failing
- Wear marks under the taps
Questions to ask before you book
- Who will actually do the work
- How your room will be protected
- Aftercare advice
- Whether the price is fixed and includes VAT
About Nurton
Nurton is about 5 miles west of Wolverhampton, in Wolverhampton. Whether you are in the middle of Nurton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Nurton is one of 96 places in Wolverhampton where we work. You can also see our page for Birmingham, about 17 miles away.
Our visits in WV6 are booked in the same way as anywhere else. Whether you live on Nurton Bank, Pattingham Road and Great Moor Road or a nearby road, a technician can come to you. We also travel to Nurton Hill (1 mile north-west), Old Perton (1 mile east), Westbeech (1 mile north-west), Pattingham (1 mile west) and Perton (1 mile east). Larger places within reach include Wolverhampton (5 miles east), Bilston (7 miles east), Coseley (7 miles south-east), Wednesfield (7 miles east), New Invention (8 miles east) and Gornal (7 miles south-east).
What’s near Nurton
Around Nurton, we work in homes near St Chad's CofE (VC) First School and The King's Church of England School. The nearest railway station is Codsall station, roughly 2.9 miles north-east. Other landmarks nearby include Wolverhampton and Midland Counties Eye Infirmary (4 miles east) and Tettenhall Transport Heritage Centre (3.2 miles east).
When we would advise against a repair
It helps to know what we cannot do too:
- A bath that is rusted through
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
Common questions in Nurton
Do you cover the entire of Wolverhampton?
We work UK-wide. Prices do not change with location.
Can you do the outside of a roll-top?
Yes. Inside and out.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How much does bath re-enamelling cost in Nurton?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your WV6 postcode.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Towns and villages near Nurton
Other services in Nurton
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Keeping it looking good
Once the work has cured, treat it gently:
- Do not let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- How easy the damage is to reach
- The colour and finish to match
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- The material, if you know it
- The postcode, so we can plan the visit
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
