Wolverhampton · England
Bath Re-enamelling for Pattingham homes
Bath re-enamelling for Pattingham, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Stains that will not shift
- A coloured bath you want in white
About our bath re-enamelling in Pattingham
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you are dealing with thin, worn enamel in places and stains that won’t shift, we can normally put it right, on acrylic baths, basins & shower trays and Victorian roll-tops alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Pattingham (WV6)
- Area hub
- Wolverhampton
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Make sure the room can be ventilated
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Read more
Towns and villages near Pattingham
Also in Pattingham
Landlords, agents and businesses in Pattingham
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Aftercare tips
Nothing complicated is needed:
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
- Have chips seen to early
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Pattingham questions
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you cover Pattingham?
Yes. We cover the whole UK and come to Pattingham and the rest of Wolverhampton. Send us photos for a fixed quote, or call 0345 017 0787.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
What happens next?
You’ll get a fixed quote back, plus dates. There’s no obligation to book.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- How much damage there is
- The colour and finish to match
- Previous DIY repairs that have to come out
- Whether we combine several jobs
The price reflects the work involved, not where you live. The full price is agreed before you book.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Any details about the material
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
What we can’t put right
Before booking, it’s worth knowing the limits:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why Pattingham clients choose us
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Most jobs done in one visit
Read our full price list and resurfacing vs replacement cost guide.
About Pattingham
Pattingham is about 6 miles west of Wolverhampton, in Wolverhampton. From the centre of Pattingham to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Pattingham is one of 96 towns and villages in Wolverhampton where we work. Our nearest city page is Birmingham, about 18 miles away.
Our repair technicians cover all of WV6. Streets in the area include High Street, High Path and Hall Close. If you’re just outside Pattingham, we cover Nurton Hill (1 mile north-east), Westbeech (1 mile north), Nurton (1 mile east), Old Perton (2 miles east) and Trescott (2 miles south-east). Within a short drive, we also cover Wolverhampton (6 miles east), Bilston (8 miles east), Coseley (8 miles south-east), Wednesfield (8 miles east), New Invention (10 miles east) and Gornal (7 miles south-east).
Landmarks near Pattingham
We visit homes around St Chad's CofE (VC) First School, Church of St Chad and The Pigot Arms and the streets around them. The closest station to Pattingham is Albrighton station, about 3.5 miles north. Other landmarks nearby include RAF Hospital Cosford (4.5 miles north) and Ryton Castle Hillfield (4.6 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
