Wiltshire · England
Bath re-enamelling & resurfacing in Ogbourne St Andrew, Wiltshire
Damaged bath in Ogbourne St Andrew? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Ogbourne St Andrew
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our technicians work on pressed steel baths, basins & shower trays and acrylic baths, and people most frequently call us about an original cast iron bath that needs restoring and a coating lifting around the plughole.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Ogbourne St Andrew (SN8)
- Region
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
How to look after the repair
How the surface is treated afterwards matters:
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- Rooms protected and left tidy
- One visit for most repairs
- Work done at your home or business
- One-year guarantee on every repair
Take a look at our full price list and guide to resurfacing and replacement costs.
FAQs for Ogbourne St Andrew
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Do you come to Ogbourne St Andrew?
Yes. We work across the UK and come to Ogbourne St Andrew. Send us pictures for a fixed quote, or call 0345 017 0787.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Ogbourne St Andrew. The price comes down to:
- What kind of damage it is
- The size and number of damaged areas
- Access to the area
- Whether old repairs or coatings need taking off
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- Any details about the material
- A clear, close picture of the problem area
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Covering Ogbourne St Andrew
Ogbourne St Andrew is about 9 miles south of Swindon, in Wiltshire. From the centre of Ogbourne St Andrew to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Ogbourne St Andrew is one of 425 places in Wiltshire we cover. You can also see our page for London, about 70 miles away.
Postcode districts we cover here: SN8. We regularly work on streets such as Sheepridge, Church Lane and Main Road and the roads around them. We also travel to Ogbourne Maizey (1 mile south-west), Ogbourne St George (1 mile north-east), Marlborough (2 miles south), Manton (3 miles south-west) and Clatford (3 miles south-west). Further out, we also cover Calne (12 miles west), Devizes (13 miles south-west), Pewsey (8 miles south), Lyneham (11 miles west), Wick (14 miles south-west) and Aldbourne (5 miles north-east).
Near you in Ogbourne St Andrew
Around Ogbourne St Andrew, we work in homes near Church of St Andrew and St John's Marlborough, among other places. Nearby you’ll also find Savernake Hospital (2.5 miles south-east) and Marlborough Castle (2.2 miles south).
- Other local spots include Marlborough and Ramsbury Rural District (2 miles south)
When a repair is not the answer
In fairness, some problems need a different fix:
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
How the visit works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Let us know if it has been repaired before
- Point us to the nearest place to park
- Clear the area around the damage
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
Do you need bath re-enamelling in Ogbourne St Andrew?
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
If you can see any of these, send us a photo:
- Stains that won’t shift
- An old resurfacing that is failing
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
Comparing quotes
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- If travel is included in the price
- What aftercare is recommended
Nearby places to Ogbourne St Andrew
More services for Ogbourne St Andrew
About our accreditations · Every repair comes with a one-year guarantee.
