Wiltshire · England
Bath re-enamelling & resurfacing in Ogbourne St George, Wiltshire
Fixed-price bath re-enamelling in Ogbourne St George and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Stains that won’t shift
- A period or roll-top bath worth keeping
Bath re-enamelling in Ogbourne St George without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We are frequently asked to fix brown or grey marks that don’t clean off and an outdated colour you’d like to change, across cast iron baths, Victorian roll-tops and acrylic baths.
You get a one-year guarantee, the same in Ogbourne St George as everywhere else we work.
- Location
- Ogbourne St George (SN8)
- Area hub
- Wiltshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
How to get a price
If you’re in Ogbourne St George and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Places near Ogbourne St George
Also in Ogbourne St George
Ogbourne St George and the surrounding area
Ogbourne St George is about 8 miles south-east of Swindon, in Wiltshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Ogbourne St George is one of 425 towns and villages in Wiltshire we cover. Our nearest city page is London, about 70 miles away.
Every address in SN8 is within our area, from the main roads to the quietest streets. From High Street, Jubb's Lane and Liddiards Green or anywhere nearby, a technician can come to you. We also cover the places around Ogbourne St George: Ogbourne St Andrew (1 mile south-west), Ogbourne Maizey (2 miles south-west), Marlborough (3 miles south), Manton (4 miles south-west) and Clatford (4 miles south-west). Within a short drive, we also cover Calne (13 miles west), Devizes (14 miles south-west), Pewsey (9 miles south), Lyneham (11 miles west), Wick (15 miles south-west) and Aldbourne (4 miles east).
What’s near Ogbourne St George
Our clients here include homes close to The Inn with the Well, Church of St George and Ogbourne CofE Primary School and the streets around them. Well-known places in the area include The Merchants House (3.3 miles south) and Ogbourne St Andrew (1.5 miles south-west).
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Questions from Ogbourne St George
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
How do I get a price for bath re-enamelling in Ogbourne St George?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
What we can’t put right
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Ogbourne St George
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Repair technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
See our full price list and resurfacing vs replacement cost guide.
What affects the price in Ogbourne St George
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How much damage there is
- The material
- The colour and finish to match
- How easy the damage is to reach
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- Something in shot to show the size
- Daylight if possible, and no flash reflection
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Do not leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What we are called out for in Ogbourne St George
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Look out for these signs:
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- A roll-top that’s seen better days
Questions to ask before you book
- Whether they match the colour on site
- Whether a trained technician does the job
- What preparation is included
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
