Shropshire · England

Bath Re-enamelling for Onibury homes

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Onibury. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • A roll-top that’s seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Onibury

What happens on the day

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for most of the day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Keep children and pets away from the room on the day
  • Keep a parking space free if you can

Get a quote

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Send pictures for a quote

Read more

How we handle bath re-enamelling in Onibury

Most baths are re-enamelled in a day. Nothing is disconnected or removed. If you’re dealing with lots of chips and rust spots and thin, worn enamel in places, we can help, whatever the material.

Whatever the size of the job, it’s backed by a one-year guarantee in Onibury and across Shropshire.

Area
Onibury (SY7)
Region
Shropshire
Guarantee
A year, on every repair
Quotes
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Repairs by material

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Landlords, agents and businesses in Onibury

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

What we’re called out for in Onibury

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Keep an eye out for any of the following:

  • An old resurfacing that’s failing
  • An original cast iron bath that needs restoring
  • Lots of chips and rust spots
  • A coloured bath you want in white

Comparing quotes

  • Whether the colour is mixed to match
  • What prep work is covered
  • What the guarantee covers, and for how long
  • A fixed quote, and whether VAT is included

Choosing a repair company

How we price bath re-enamelling

Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:

  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • Doing more than one item at once

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

How to get a fixed price

You can usually get a fixed price without us visiting. To help us price it:

  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • The material, if you know it
  • A coin beside the damage so we can judge size

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Covering Onibury

Onibury is about 18 miles south-west of Bridgnorth, in Shropshire. Whether you’re in the middle of Onibury or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Onibury is one of 433 places in Shropshire we cover. We work right across the region, from Onibury to Birmingham (about 39 miles away).

Jobs in SY7 work the same way as everywhere else we cover. We also travel to Whittytree (1 mile south-west), Craven Arms (3 miles north-west), Halford (3 miles north-west), Long Meadowend (3 miles north-west) and Clungunford (4 miles west). We also work in nearby towns such as Ludlow (5 miles south-east), Church Stretton (9 miles north), Cleobury Mortimer (14 miles east), Bishop's Castle (10 miles north-west), Clun (10 miles west) and East Hamlet (4 miles south-east).

Near you in Onibury

We visit homes around Onny CofE (A) Primary School and Church of St Michael, among other places. Onibury’s nearest station is Craven Arms station, about 2.9 miles north-west of the centre. Well-known places in the area include Land of Lost Content (2.6 miles north-west) and Ludlow Community Hospital (4.4 miles south-east). Green spaces nearby include Shelderton Hill.

Map of Onibury © OpenStreetMap contributors

FAQs for Onibury

What does bath re-enamelling cost?

Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.

Does the bath have to be removed?

No. We resurface it in place, so the tiles and taps stay put.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Can you price it without visiting?

Normally, yes. A close-up and a wider photo are enough to give a fixed quote.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What happens after I send photos?

We come back with a fixed price, typically with dates to choose from. You’re under no obligation.

Someone resurfaced my bath and it’s peeling. Can you help?

Normally, yes. The old coating comes off before we resurface it. Mention it when you send pictures.

When we’d advise against a repair

It helps to know what we can’t do too:

  • Acrylic that moves when you stand in it
  • Steel that has corroded right through
  • Leaks from fittings rather than the bath

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Victorian roll-tops

Keeping it looking good

To keep it looking its best:

  • Wash away dyes and oils after use
  • Store bottles off the bath
  • Don’t leave a chip unrepaired
  • Stick to gentle, non-abrasive cleaners

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Why repair rather than replace?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • Honest advice, even when it means no job
  • CHAS and Constructionline accredited
  • One visit for most repairs
  • One price list for the whole UK

Read our full price list or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.