Norfolk · England
Bath re-enamelling & resurfacing in Thrigby, Norfolk
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Thrigby. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Bath re-enamelling in Thrigby without replacing anything
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We regularly repair acrylic baths, basins & shower trays and cast iron baths, and people most often call us about a coating lifting around the plughole and a period or roll-top bath worth keeping.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Thrigby (NR29)
- Area hub
- Norfolk
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Thrigby
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Clients usually contact us about:
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- Lots of chips and rust spots
- Worn patches where water runs and sits
Comparing quotes
- How the colour is matched
- Aftercare advice
- How changes to the job are handled
- How long the guarantee is and what it covers
Questions from Thrigby
Which areas do you work in?
Everywhere in the UK, Thrigby included. There’s no extra charge for travel.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you work in Thrigby?
Yes. We work across the UK and travel to Thrigby. Send us photos for a fixed quote, or call 0345 017 0787.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
How do I get a price for bath re-enamelling in Thrigby?
Prices start from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your NR29 postcode.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Towns and villages near Thrigby
Other services in Thrigby
When a repair isn’t the answer
Some jobs aren’t right for a repair, including:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. You can expect it to take most of the day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
Get a quote
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, so there is no premium for Thrigby. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- One picture of the whole bath
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Landlord and trade work in Thrigby
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Where we work around Thrigby
Thrigby is about 5 miles north-west of Great Yarmouth, in Norfolk. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Thrigby is one of 797 towns and villages in Norfolk we cover.
Jobs in NR29 are booked in the same way as anywhere else. Nearby, we also work in Runham (1 mile south), Filby (1 mile north-east), Mautby (1 mile east), Burgh St Margaret (1 mile north-west) and Ormesby St Michael (2 miles north-east). Further out, we also cover Norwich (15 miles west), Great Yarmouth (5 miles south-east), Gorleston-on-Sea (7 miles south-east), Sprowston (13 miles west), Thorpe St Andrew (12 miles west) and Southtown (5 miles south-east).
Near you in Thrigby
We visit homes around Filby Primary School and St Mary's. The closest station to Thrigby is Acle station, about 4.1 miles west of the centre. A little further out are Fishermens Hospital Including Gate Piers And Railings (4.9 miles south-east) and Caister Castle (2.7 miles east). The countryside around Thrigby includes Filby Broad and Berney Marshes RSPB reserve.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
