Cambridgeshire · England
Bath Re-enamelling for Orwell homes
Fixed-price bath re-enamelling in Orwell and the surrounding area, usually in one visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
About Orwell
Orwell is about 6 miles north of Royston, in Cambridgeshire. We visit homes and businesses in Orwell and the surrounding area, so there is no workshop to go to. We work in 371 places in Cambridgeshire. You can also see our page for London, about 44 miles away.
Every address in SG8 is within our area, from the main roads to the quietest streets. Streets in the area include High Street, Cross Lane Close and Town Green Road, all of which we cover. If you’re just outside Orwell, we cover Wimpole (1 mile west), Great Eversden (2 miles north), Little Eversden (2 miles north), Harlton (2 miles north-east) and Arrington (2 miles west). Larger places within reach include Cambridge (8 miles north-east), St Neots (12 miles north-west), St Ives (14 miles north), Royston (6 miles south), Cambourne (6 miles north) and Godmanchester (14 miles north-west).
Near you in Orwell
Typical jobs here are in homes near Church of St Andrew, The Chequers Public House and Petersfield CofE Aided Primary School and the streets around them. For rail, the closest station is Shepreth station, roughly 2.3 miles south-east. Further afield, we also cover the area around Orwell Toot Hill (less than half a mile north-east) and Tower Museum Bassingbourn (3.1 miles south-west). For a walk, there’s Rowley's Hill and L-moor.
About our bath re-enamelling in Orwell
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a bath in a colour that no longer suits and several chips and rust patches, across basins & shower trays, Victorian roll-tops and cast iron baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Orwell (SG8)
- Region
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
So the finish stays in good condition for years:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs straight away
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- How many areas need work
- The colour and finish to match
- Where the damage is and how we get to it
- How many items we do on one visit
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A picture taken from further back
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Signs you need bath re-enamelling in Orwell
Many baths we resurface have simply been well used. The body of the bath is usually perfectly sound.
You may need us if you’ve spotted:
- A coloured bath you want in white
- Several chips and rust patches
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
Comparing quotes
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- Who turns up on the day
- Whether the colour is mixed to match
What we can’t put right
To be straight with you, there are a few things a repair won’t fix:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Orwell
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
FAQs for Orwell
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How much does bath re-enamelling cost in Orwell?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we will ask for another angle.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Repair or replace in Orwell?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Orwell clients choose us
- One-year guarantee on every repair
- One visit for most repairs
- Dust sheets down, tidy finish
- Repair technicians who travel to you, UK-wide
See our pricing or bath cost comparison.
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day in most cases. The room is left tidy and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
Get a quote
If you are in Orwell and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Nearby places to Orwell
More services for Orwell
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
