Cambridgeshire · England
Bath Re-enamelling in Great Eversden
Bath re-enamelling for Great Eversden, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Great Eversden: your questions answered
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Do you come to Great Eversden?
Yes, we do. We send a technician to Great Eversden for every job, with no extra charge for travel.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Bath re-enamelling in Great Eversden, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you’re dealing with a bath that stays dull however much you clean it and an old resurfacing that’s failing, we can help, on Victorian roll-tops, cast iron baths and acrylic baths alike.
Every repair is covered by our one-year guarantee.
- Area
- Great Eversden (CB23)
- Region
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also in Great Eversden
Great Eversden and nearby
Great Eversden is about 7 miles south-west of Cambridge, in Cambridgeshire. Whether you’re in the middle of Great Eversden or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Great Eversden is one of 371 towns and villages in Cambridgeshire we cover. Our jobs stretch from Great Eversden to London (about 46 miles away).
Our visits in CB23 work the same way as everywhere else we cover. Local streets include High Street, Wimpole Road and Ivett's Lane, all of which we cover. Other places close to Great Eversden include Little Eversden (1 mile east), Harlton (2 miles south-east), Kingston (2 miles north-west), Toft (2 miles north) and Orwell (2 miles south). We also work in nearby towns such as Cambridge (7 miles north-east), St Neots (12 miles west), Huntingdon (14 miles north-west), St Ives (12 miles north), Royston (8 miles south) and Cambourne (5 miles north-west).
Around Great Eversden
Typical jobs here are in homes near The Hoops pub, Church of St Mary and Comberton Village College and the streets around them. The nearest railway station is Shepreth station, about 3.7 miles south-east. Well-known places in the area include Orwell Toot Hill (1.7 miles south) and Nuffield Health Cambridge Hospital (5.9 miles east). Not far away are Hardwick Wood and Rowley's Hill.
Honest limits
Before you book, it’s worth knowing the limits:
- A metal bath with a through crack
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
The process
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a full day for most jobs. The room is left tidy.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Getting ready for the visit
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
What affects the price in Great Eversden
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Where the damage is and how we get to it
- How many items we do on one visit
- The size and number of damaged areas
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Quotes from your pictures
Two or three clear pictures are normally enough. Try to include:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Do you need bath re-enamelling in Great Eversden?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Before booking anyone
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
- How the room is protected while they work
- How soon you can use it again
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Wash away dyes and oils after use
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
