Lancashire · England
Bath Re-enamelling in Out Rawcliffe
Bath re-enamelling in and around Out Rawcliffe: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that will not shift
- A roll-top that is seen better days
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Out Rawcliffe. What changes the price is:
- What kind of damage it is
- Where the damage is and how we get to it
- How hard the colour is to match
- The material and finish
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Quotes from your photos
Phone pictures are fine. Just ensure we can see:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- Where you are, by postcode
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Bath re-enamelling in Out Rawcliffe without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re often asked to fix a bath that stays dull however much you clean it and several chips and rust patches, across cast iron baths, pressed steel baths and Victorian roll-tops.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Out Rawcliffe (PR3)
- Region
- Lancashire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Out Rawcliffe
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed any of these:
- Wear marks under the taps
- An old resurfacing that’s failing
- A coloured bath you want in white
- Several chips and rust patches
What to look for in a quote
- If travel is included in the price
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- Who turns up on the day
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
When a repair is not the answer
A repair isn’t right for every job, for example:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Out Rawcliffe and the surrounding area
Out Rawcliffe is about 4 miles north-east of Poulton-le-Fylde, in Lancashire. Whether you’re in the middle of Out Rawcliffe or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 482 towns and villages in Lancashire, from the larger towns to small villages. We work right across the region, from Out Rawcliffe to Liverpool (32 miles away).
Every address in PR3 is covered, from the main roads to the quietest streets. Streets in the area include Chapel Lane and Rawcliffe Road, and we cover them all. We also travel to Whin Lane End (1 mile west), Larbreck (1 mile south), Hale Nook (1 mile north-west), Hambleton (2 miles west) and Sower Carr (2 miles north-west). We also work in nearby towns such as Preston (11 miles south-east), Lancaster (13 miles north), Lytham St Anne's (9 miles south-west), Bamber Bridge (14 miles south-east), Morecambe (14 miles north) and Leyland (15 miles south-east).
What’s near Out Rawcliffe
Typical jobs here are in homes near Church of St John. The nearest railway station is Poulton-Le-Fylde station, about 3.7 miles south-west. Other landmarks nearby include Teanlowe Centre (3.9 miles south-west) and Bispham Hospital (4.7 miles west). Not far away are Winmarleigh and Cockerham Moss.
How it works
We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Nearby places to Out Rawcliffe
Other services in Out Rawcliffe
Out Rawcliffe: your questions answered
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Most jobs done in one visit
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Colour mixed on the day to match
Read our pricing and guide to resurfacing and replacement costs.
Keeping it looking good
It’s all simple stuff:
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Do not leave a chip unrepaired
- Don’t let dyes or oils sit on the finish
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.
