Northumberland · England

Bath Re-enamelling for Ovingham homes

Bath re-enamelling in and around Ovingham: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Ovingham

Bath re-enamelling at your home in Ovingham

We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s a dull, rough surface that won’t come clean and lots of chips and rust spots, we can generally put it right, on acrylic baths, cast iron baths and Victorian roll-tops alike.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Ovingham (NE42)
Area hub
Northumberland
Warranty
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Repairing versus replacing in Ovingham

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

What you get with us

  • CHAS, Constructionline and SafeContractor accredited
  • One price list for the entire UK
  • Honest advice, even when it means no job
  • Nothing taken out or refitted

Read our pricing or resurfacing vs replacement cost guide.

How it works

The work is clean and fairly quiet. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Point us to the nearest place to park
  • Have a window or extractor fan available

Get a quote

To get a price, send two or three pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a fixed quote

Related advice

About Ovingham

Ovingham is about 6 miles west of Blaydon, in Northumberland. Whether you are in the middle of Ovingham or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 189 places across Northumberland. You can also see our page for Newcastle upon Tyne, about 9 miles away.

Our visits in NE42 are booked in the same way as anywhere else. Streets in the area include Bewick Lane, North Meadows and Tyne Gardens. Other places close to Ovingham include Prudhoe (1 mile south-east), Eltringham (1 mile south-west), Ovington (1 mile west), Mickley Square (1 mile south-west) and Horsley (1 mile north). Further out, we also cover Cramlington (14 miles north-east), Morpeth (15 miles north-east), Hexham (9 miles west), Ponteland (7 miles north-east), Dudley (13 miles north-east) and Corbridge (6 miles west).

Local landmarks in Ovingham

We visit homes around Church of St Mary, Prudhoe Community High School and White Swan pub and the streets around them. Ovingham has its own railway station: Prudhoe station. A little further out are Wylam Railway Museum (2.1 miles east) and Prudhoe Urban District (1 mile south-east). For a walk, there’s Currock Hill.

Map of Ovingham © OpenStreetMap contributors

What bath re-enamelling costs

Prices start from £350. Every quote is fixed and free. What we take into account:

  • The material and finish
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • The colour and finish to match

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed price

We price nearly every job from photos. This is what we need:

  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size
  • What it’s made of, if you know

If you are in Ovingham and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Materials and what they mean for the repair

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.

Aftercare tips

How the surface is treated afterwards matters:

  • Wipe the bath dry after use in hard water areas
  • Respect the curing time we give you
  • Store bottles off the bath
  • A dripping tap should be fixed promptly

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Questions from Ovingham

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Do you cover Ovingham?

Yes, we do. We send a technician to Ovingham for every job, and the price is the same as everywhere else.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Can you fix a peeling bath coating?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

For landlords and businesses

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

What a repair can’t fix

Before booking, it’s worth knowing the limits too:

  • An acrylic bath that flexes badly underfoot
  • Plumbing leaks, which need a plumber
  • Holes rusted through the metal

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths

What we are called out for in Ovingham

Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.

You may need us if you’ve spotted any of these:

  • A coloured bath you want in white
  • Wear marks under the taps
  • A period or roll-top bath worth keeping
  • Staining under the taps and around the waste

Questions to ask before you book

  • A fixed price, and whether VAT is included
  • Whether they match the colour on site
  • If travel is included in the price
  • What the guarantee covers, and for how long

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.