North Yorkshire · England
Bath re-enamelling & resurfacing in Oxton, North Yorkshire
Bath re-enamelling across Oxton and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Oxton, done in place
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Typical jobs include worn patches where water runs and sits and a roll-top that’s seen better days, on cast iron baths, acrylic baths and pressed steel baths.
All our work comes with a one-year guarantee, wherever you are in North Yorkshire.
- Where
- Oxton (LS24)
- County
- North Yorkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface without moving it. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- One visit for most repairs
- Colour-matched on site
- Every repair guaranteed for a year
- A fixed quote before booking
Read our prices page or guide to resurfacing and replacement costs.
When to call us in Oxton
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- A coloured bath you want in white
- Lots of chips and rust spots
What your quote should include
- What preparation is included
- When it can be used again
- Aftercare advice
- If travel is included in the price
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a full day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Common questions in Oxton
Do you cover the whole of North Yorkshire?
We work UK-wide, and that includes Oxton. Our prices are the same everywhere.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Will the price change on the day?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
What a repair can’t fix
Before you book, it’s worth knowing the limits too:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
Materials we work on in Oxton
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Oxton. The price comes down to:
- What kind of damage it is
- Any earlier repairs that need removing first
- The material
- Access to the area
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Any details about the material
- A clear, close picture of the problem area
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Landlords, agents and businesses in Oxton
We work for landlords, letting agents and housing providers in Oxton as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Where we work around Oxton
Oxton is about 7 miles south-east of Wetherby, in North Yorkshire. Across the LS24 area, we come to you. Oxton is one of 626 places in North Yorkshire where we work. Our jobs stretch from Oxton to Leeds (14 miles away).
We work across LS24 and the streets around it. Neighbouring places we cover include Tadcaster (1 mile west), Stutton (2 miles south-west), Ulleskelf (2 miles south-east), Towton (2 miles south-west) and Scarthingwell (4 miles south). Further out, we also cover Harrogate (15 miles north-west), Knaresborough (13 miles north-west), Selby (10 miles south-east), Starbeck (13 miles north-west), Bilton (15 miles north-west) and Harlow Hill (15 miles north-west).
Landmarks near Oxton
Our customers here include homes close to Church of St Mary, The Broken Bridge pub and Tadcaster Primary Academy, among other places. The nearest railway station is Ulleskelf station, roughly 2.2 miles south-east. A little further out are Kyme Castle (2.6 miles north-west) and The Ark Museum (1.1 miles west).
Towns and villages near Oxton
What else we do in Oxton
About our accreditations · Every repair comes with a one-year guarantee.
