North Yorkshire · England

Bath re-enamelling & resurfacing in Stutton, North Yorkshire

Fixed-price bath re-enamelling in Stutton and the surrounding area, usually in one visit.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • A roll-top that’s seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Stutton homes

Stutton: your questions answered

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

What do you need from me?

Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.

Can a failed resurfacing be redone?

Normally, yes. The old coating comes off before we resurface it. Mention it when you send photos.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Bath re-enamelling in Stutton without replacing anything

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include brown or grey marks that don’t clean off and an original cast iron bath that needs restoring, across basins & shower trays, acrylic baths and Victorian roll-tops.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Area
Stutton (LS24)
Area hub
North Yorkshire
Guarantee
One year on every repair
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Aftercare tips

Aftercare is simple:

  • Get any chip repaired quickly
  • Wash away dyes and oils after use
  • Do not leave bottles, razors or sponges standing on the surface
  • Avoid suction-cup mats

Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Stutton and the surrounding area

Stutton is about 7 miles south-east of Wetherby, in North Yorkshire. Wherever you are in the LS24 postcode area, we come to you. Our repair technicians cover all 626 towns and villages in North Yorkshire. We work right across the region, from Stutton to Leeds (about 12 miles away).

Jobs in LS24 work the same way as everywhere else we cover. Local streets include Manor Road, Weedling Gate and Green Lane, all of which we cover. We also cover the places around Stutton: Tadcaster (1 mile north), Towton (1 mile south), Oxton (2 miles north-east), Ulleskelf (3 miles south-east) and Scarthingwell (3 miles south). Further out, we also cover Harrogate (14 miles north-west), Knaresborough (12 miles north-west), Selby (10 miles south-east), Starbeck (13 miles north-west), Bilton (15 miles north-west) and Harlow Hill (14 miles north-west).

Near you in Stutton

Locally, our jobs take us to homes close to Hare And Hounds pub and Tadcaster Grammar School and the streets around them. The closest station to Stutton is Ulleskelf station, roughly 2.5 miles east of the centre. Nearby you will also find Kyme Castle (2.3 miles north) and The Ark Museum (1.2 miles north).

Map of Stutton © OpenStreetMap contributors

Work for landlords and builders

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Should you replace it?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

What you get with us

  • Honest advice, even when it means no job
  • Rooms protected and left tidy
  • A fixed quote before you book
  • CHAS and Constructionline accredited

Read our full price list or resurfacing vs replacement cost guide.

When a repair isn’t the answer

We won’t take on work that won’t last, so these are the limits:

  • A bath that is rusted through
  • Leaks from fittings rather than the bath
  • A poorly supported acrylic bath, until it’s firmed up

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

What happens on the day

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a full day, and we will keep you posted as we go.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Tell us about any previous repairs or coatings
  • Make sure the area is dry
  • Plan for the room to be out of bounds to pets and children

Ask for a price

Most clients in Stutton get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a free quote

Advice

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

What we’re called out for in Stutton

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

The things customers usually mention when they call are:

  • Lots of chips and rust spots
  • A coating lifting around the plughole
  • An outdated colour you’d like to change
  • Enamel that is lost its shine and feels rough

Comparing quotes

  • How soon you can use it again
  • What happens if they find more damage
  • How the colour is matched
  • How the room is protected while they work

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.