Aberdeenshire · Scotland
Bath Re-enamelling in Oyne
We travel to Oyne for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
What affects the price in Oyne
Resurfacing from £350. We don’t charge extra for travel to Oyne. The price comes down to:
- The material
- Access to the area
- How hard the colour is to match
- How much damage there is
We charge the same wherever you are, with no extra for Oyne. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- Any details about the material
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Bath re-enamelling in Oyne, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. We work on pressed steel baths, acrylic baths and Victorian roll-tops, and people most frequently call us about a peeling or bubbling previous coating and an outdated colour you’d like to change.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Location
- Oyne (AB52)
- County
- Aberdeenshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Every repair guaranteed for a year
- Same prices wherever you are
- We leave the room as we found it
- CHAS and Constructionline accredited
Take a look at our pricing or guide to resurfacing and replacement costs.
When to call us in Oyne
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
People generally call us after spotting one of these:
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
- A roll-top that’s seen better days
Comparing quotes
- Whether a trained technician does the job
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
- How the room is protected while they work
Also in Oyne
Oyne questions
Are there extra charges for Oyne?
Travel is included in the price, and we charge the same wherever you are.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we will ask for another angle.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair something that is been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Covering Oyne
Oyne is about 6 miles west of Inverurie, in Aberdeenshire. From the centre of Oyne to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 161 places in Aberdeenshire, from the larger towns to small villages.
We work across the AB52 postcode area. Other places close to Oyne include Old Rayne (2 miles north), New Rayne (2 miles north), Insch (3 miles north-west), Chapel of Garioch (3 miles east) and Auchleven (3 miles west). Further out, we also cover Inverurie (6 miles east), Westhill (15 miles south-east), Turriff (15 miles north), Huntly (13 miles north-west), Garioch (7 miles east) and Kemnay (7 miles south-east). For island and remote addresses, ring us first and we’ll plan the trip.
What’s near Oyne
Typical jobs here are in homes near Archaeolink Prehistory Park and Old Westhall. For rail, the closest station is Insch station, roughly 2.8 miles north-west. Other landmarks nearby include Insch War Memorial Hospital (2.9 miles north-west) and Insch Connection Museum (2.9 miles north-west).
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Keeping it looking good
Looking after the surface is easy:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It normally takes most of the day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep a parking space free if you can
- Open a window if you can
- Keep pets and children out of the room while we work
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
