Gloucestershire · England
Bath Re-enamelling for Parkend homes
Full bath re-enamelling and resurfacing in Parkend, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Parkend
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on pressed steel baths, basins & shower trays and cast iron baths, and common reasons people get in touch are thin, worn enamel in places and several chips and rust patches.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Parkend (GL15)
- Region
- Gloucestershire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes most of the day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Make sure the room can be ventilated
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Your questions about bath re-enamelling in Parkend
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Are there extra charges for Parkend?
No. Our quotes include travel, and we charge the same wherever you are.
Do you cover the entire of Gloucestershire?
The entire UK, including all of Gloucestershire. Just include your postcode and we’ll confirm dates.
What happens next?
We review the photos and send a fixed quote with dates.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Parkend and nearby
Parkend is about 10 miles south of Ross-on-Wye, in Gloucestershire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. Parkend is one of 470 towns and villages in Gloucestershire we cover. You can also see our page for Birmingham, about 56 miles away.
Jobs in GL15 are booked in the same way as anywhere else. From Fancy Hill, Cannop Road and New Road or a nearby road, a technician can come to you. We also cover the places around Parkend: Whitecroft (1 mile south), Pillowell (1 mile south-east), Ellwood (1 mile west), Yorkley (1 mile south-east) and Bream (2 miles south). Larger places within reach include Gloucester (15 miles east), Stroud (14 miles east), Quedgeley (12 miles east), Lydney (3 miles south-east), Tredworth (15 miles north-east) and Kingsway Village (13 miles east).
Around Parkend
Locally, our jobs take us to homes close to Nagshead, Parkend Primary School and Church of St.Paul and the streets around them. Parkend’s nearest station is Lydney station, about 4.2 miles south of the centre. A little further out are Cinderbury Iron Age Experience (2.3 miles west) and Rock Castle (3 miles north-west). For a walk, there’s Foxes Bridge Bog.
Signs you need bath re-enamelling in Parkend
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- Wear marks under the taps
- Brown or grey marks that don’t clean off
What to look for in a quote
- How soon you can use it again
- What the guarantee covers, and for how long
- How changes to the job are handled
- How to look after the finish
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
For landlords and businesses
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- How much damage there is
- Any earlier repairs that need removing first
- Access to the area
- The material
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
You can normally get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- Where you are, by postcode
- What it’s made of, if you know
- Any earlier repairs or coatings
For a price in Parkend, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
- Don’t let dyes or oils sit on the finish
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Places near Parkend
Also in Parkend
Honest limits
Before you book, it’s worth knowing the limits:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
Materials we work on in Parkend
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
