Gloucestershire · England
Bath Re-enamelling for Yorkley Slade homes
Bath re-enamelling in and around Yorkley Slade: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
About our bath re-enamelling in Yorkley Slade
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s an outdated colour you’d like to change and thin, worn enamel in places, we can help, on Victorian roll-tops, cast iron baths and basins & shower trays alike.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Area
- Yorkley Slade (GL15)
- Area hub
- Gloucestershire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Yorkley Slade
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Common reasons people in Yorkley Slade contact us are:
- Thin, worn enamel in places
- Lots of chips and rust spots
- Stains that won’t shift
- A coloured bath you want in white
Before you book anyone
- What aftercare is recommended
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- How the colour is matched
Towns and villages near Yorkley Slade
Also in Yorkley Slade
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Your questions about bath re-enamelling in Yorkley Slade
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you come to Yorkley Slade?
We do. Technicians travel to Yorkley Slade from across the region, with no extra charge for travel.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Where we work around Yorkley Slade
Yorkley Slade is about 10 miles north of Thornbury, in Gloucestershire. Whether you’re in the middle of Yorkley Slade or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 470 places across Gloucestershire. Our nearest city page is Birmingham, about 56 miles away.
Our visits in GL15 are booked in the same way as anywhere else. You will find streets such as Woodland Place, Harold Road and Tylers Way. Neighbouring places we cover include Yorkley (1 mile west), Oldcroft (1 mile south-east), Pillowell (1 mile south-west), Whitecroft (1 mile south-west) and Parkend (2 miles west). We also work in nearby towns such as Gloucester (14 miles north-east), Stroud (12 miles east), Quedgeley (11 miles north-east), Tredworth (13 miles north-east), Kingsway Village (11 miles east) and Cam (8 miles south-east).
Landmarks near Yorkley Slade
In Yorkley Slade, that means homes near Church of All Saints, New Fancy and Yorkley Primary School, among other places. The nearest railway station is Lydney station, roughly 3.4 miles south of the centre. A little further out are Bledisloe Tump (2.6 miles east) and Lydney Park Museum (3.4 miles south). For a walk, there’s Foxes Bridge Bog.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price depends on:
- How much damage there is
- The type of damage
- Whether we combine several jobs
- Unusual colours or finishes
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- One picture of the entire bath
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Aftercare tips
So the finish stays in good condition:
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
How it works
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Make sure the area is dry
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Repair or replace in Yorkley Slade?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Fixed prices from your photos
- No extra charge for your area
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
Take a look at our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
