Derbyshire · England

Bath Re-enamelling for Parwich homes

Local bath re-enamelling for Parwich: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Parwich

Common questions in Parwich

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a picture of the entire item with your DE6 postcode.

Can you repair something that is been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Bath re-enamelling in Parwich without replacing anything

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are stains that won’t shift and an original cast iron bath that needs restoring.

You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.

Where
Parwich (DE6)
Region
Derbyshire
Guarantee
A year, on every repair
Price
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

About Parwich

Parwich is about 11 miles north-west of Belper, in Derbyshire. Our repair technicians come to homes and businesses in Parwich and the surrounding area, so you don’t need to take anything anywhere. Parwich is one of 532 towns and villages in Derbyshire we cover. Our nearest city page is Manchester, about 34 miles away.

Our visits in DE6 work the same way as everywhere else we cover. You’ll find streets such as Monsdale Lane and Creamery Lane, all of which we cover. Other places close to Parwich include Alsop en le Dale (2 miles west), Fenny Bentley (3 miles south), Thorpe (3 miles south-west), Swinscoe (5 miles south-west) and Ashbourne (5 miles south). Within a short drive, we also cover Belper (11 miles east), Buxton (14 miles north-west), Ripley (13 miles east), Matlock (8 miles north-east), Clay Cross (14 miles north-east) and Alfreton (14 miles east).

Around Parwich

We visit homes around Sycamore Inn, Church of St Peter and Parwich Primary School, among other places. Well-known places in the area include Alstonefield Geohut (3.9 miles west) and St Oswalds Hospital (5.3 miles south). For a walk, there is Castern Wood and Hawks Low.

Map of Parwich © OpenStreetMap contributors

Why repair rather than replace?

A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

Why Parwich customers choose us

  • Everything repaired in place
  • Rooms protected and left tidy
  • Usually one visit, start to finish
  • Accredited with CHAS, Constructionline and SafeContractor

Read our prices page and bath cost comparison.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

How we price bath re-enamelling

Prices start from £350. There is no area surcharge for Parwich. The price reflects:

  • The material and finish
  • How much damage there is
  • Where the damage is and how we get to it
  • The colour and finish to match

Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Quotes from your photos

When you take your photos, these tips help us give you a firm price:

  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • Where you are, by postcode
  • Something in shot to show the size

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Dry the bath after use to stop limescale
  • Stick to gentle, non-abrasive cleaners
  • Do not let dyes or oils sit on the finish
  • Repair dripping taps early

Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

How it works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

How to prepare

  • Clear the area around the damage
  • Keep a parking space free if you can
  • Mention any earlier repairs or resurfacing

Ask for a price

Upload pictures of the damage and a wider shot of the entire item, with your DE6 postcode, and we will reply with a fixed quote.

Get a fixed price

Read more

Work for landlords and builders

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

We’re used to working with agents and managing companies. Send the address, photos and access details.

When we would advise against a repair

To be straight with you, some problems need a different fix:

  • Steel that has corroded right through
  • Acrylic that moves when you stand in it
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we work on in Parwich

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.