Herefordshire · England
Bath Re-enamelling in Pencombe
Bath re-enamelling for Pencombe, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring

Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Free fixed quotes from pictures
- Everything repaired in place
- Same prices wherever you are
- Colours mixed by hand to suit your surface
Read our full price list and bath cost comparison.
About our bath re-enamelling in Pencombe
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s stains that won’t shift and an outdated colour you’d like to change, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.

- Area
- Pencombe (HR7)
- County
- Herefordshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Pencombe
Other services in Pencombe
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
If you manage property in Pencombe, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
What we’re called out for in Pencombe
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
People usually call us when they notice one of these:
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- A coloured bath you want in white
What your quote should include
- What preparation is included
- How long it needs to cure
- Whether they match the colour on site
- Who will actually do the work
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day, and we’ll keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
Getting a price
Upload photos of the damage and a wider shot of the whole item, and tell us you’re in Pencombe, and we’ll reply with a fixed quote.
Related advice
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
About Pencombe
Pencombe is about 10 miles north-east of Hereford, in Herefordshire. Clients in Pencombe get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We work in all 255 towns and villages across Herefordshire. You can also see our page for Birmingham, about 36 miles away.
Postcode districts we cover here: HR7. Close by, we cover Stoke Cross (2 miles south-east), Bredenbury (2 miles north), Stoke Lane (3 miles south-east), Grendon Green (3 miles north) and Bromyard (3 miles east). Further out, we also cover Hereford (10 miles south-west), Ledbury (11 miles south-east), Leominster (8 miles north-west), Redhill (11 miles south-west), Newton Farm (11 miles south-west) and Whitecross (10 miles south-west).
What’s near Pencombe
We visit homes around Church of St John and Pencombe CofE Primary School and the streets around them. A little further out are Dunder Camp and Upper Town Mound (2.2 miles south-west) and The Time Machine Museum of Science Fiction (3.7 miles east).
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
FAQs for Pencombe
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Pencombe. The price comes down to:
- The material and finish
- Any earlier repairs that need removing first
- Access to the area
- Doing more than one item at once
We charge the same wherever you are, so there is no premium for Pencombe. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
Phone photos are fine. Just make sure we can see:
- A coin beside the damage so we can judge size
- Details of any past repairs
- A picture taken from further back
- Where you are, by postcode
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.

