Herefordshire · England
Bath Re-enamelling in Stoke Cross
Bath re-enamelling for Stoke Cross, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that is seen better days
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Bath re-enamelling in Stoke Cross, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We’re frequently asked to fix stains that won’t shift and a bath in a colour that no longer suits, in cast iron baths, acrylic baths and basins & shower trays.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Where
- Stoke Cross (HR7)
- Area hub
- Herefordshire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. You will know the full cost before booking. We look at:
- Any earlier repairs that need removing first
- The type of damage
- The colour and finish to match
- How much damage there is
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Send pictures for a quote
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- Where you are, by postcode
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why us?
- One visit for most repairs
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
Take a look at our prices page and bath cost comparison.
Towns and villages near Stoke Cross
More services for Stoke Cross
FAQs for Stoke Cross
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we will quote them together.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens next?
We come back with a fixed price. You’re under no obligation.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
Dry the bath after use if possible, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Stoke Cross, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a full day for most jobs. We leave the room clean and you’ll know when it can be used.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
Get a quote
For a price in Stoke Cross, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Covering Stoke Cross
Stoke Cross is about 10 miles north-east of Hereford, in Herefordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Stoke Cross is one of 255 towns and villages in Herefordshire where we work. You can also see our page for Birmingham, about 35 miles away.
We cover every part of the HR7 postcode area and the streets around it. Whether you live on Woodland View and Westbury or anywhere nearby, a technician can come to you. We also cover the places around Stoke Cross: Stoke Lane (1 mile east), Much Cowarne (2 miles south), Pencombe (2 miles north-west), Bishops Frome (3 miles south-east) and Bromyard (3 miles north-east). Larger places within reach include Hereford (10 miles south-west), Ledbury (9 miles south-east), Leominster (10 miles north-west), Redhill (11 miles south-west), Newton Farm (11 miles south-west) and Whitecross (10 miles south-west).
Around Stoke Cross
Around Stoke Cross, we work in homes near Plough Inn and Church of St Peter and St Paul and the streets around them. Well-known places in the area include Bromyard Community Hospital (3 miles north-east) and Dunder Camp and Upper Town Mound (2.6 miles west).
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
