Stoke-on-Trent · England
Bath Re-enamelling for Penkhull homes
Our repair technicians come to Penkhull for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- Stains that won’t shift

Bath re-enamelling in Penkhull without replacing anything
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include thin, worn enamel in places and lots of chips and rust spots, across acrylic baths, pressed steel baths and cast iron baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

- Location
- Penkhull (ST4)
- Region
- Stoke-on-Trent
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let the surface dry out before the visit
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Read more
Towns and villages near Penkhull
More services for Penkhull
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We take into account:
- How much damage there is
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
Two or three clear photos are normally enough. It helps if you send:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Your postcode, so we can check dates
- A picture taken from further back
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Penkhull questions
How do I get a price for bath re-enamelling in Penkhull?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
What happens next?
You’ll get a fixed quote back. You are under no obligation.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Honest limits
A repair isn’t right for every job, for example:
- Steel that has corroded right through
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Covering Penkhull
Penkhull is about 2 miles south-west of Stoke-on-Trent, in Stoke-on-Trent. Clients in Penkhull get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 59 towns and villages across Stoke-on-Trent, from the larger towns to small villages. We work right across the region, from Penkhull to Manchester (33 miles away).
Every address in ST4 is within our area. Whether you live on Algar Road, Lodge Road and Collin Road or anywhere nearby, we can come to you. We also cover the places around Penkhull: Stoke-upon-Trent (1 mile north-east), Shelton (1 mile north-east), Etruria (1 mile north), Stoke-on-Trent (2 miles north-east) and Hanley (2 miles north-east). Within a short drive, we also cover Burslem (3 miles north), Tunstall (4 miles north), Smallthorne (4 miles north), Porthill (3 miles north-west), Birches Head (3 miles north-east) and Ford Green (4 miles north). Penkhull is among the bigger towns we cover in Stoke-on-Trent.
Landmarks near Penkhull
Our customers here include homes close to Thistley Hough Academy, Church of St Thomas the Apostle and The Willows Primary School, among other places. Nearby too are The Old Greyhound Public House (less than half a mile south) and St Joseph's Preparatory School (0.9 miles south). The nearest railway station is Stoke-On-Trent station, about 0.8 miles north-east of the centre. Other landmarks nearby include Minton Museum (0.5 miles east) and The Potteries Centre (2 miles north-east). The countryside around Penkhull includes Hem Heath Woods and Westport Lake.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Landlord and trade work in Penkhull
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Signs you need bath re-enamelling in Penkhull
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Clients typically contact us about:
- Several chips and rust patches
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Wear marks under the taps
What your quote should include
- How the room is protected while they work
- How to look after the finish
- Whether the price is fixed and includes VAT
- What preparation is included
Looking after it afterwards
So the finish stays in good condition for years:
- Respect the curing time we give you
- Repair dripping taps early
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.

