Stoke-on-Trent · England
Bath re-enamelling & resurfacing in Tunstall, Stoke-on-Trent
Our technicians come to Tunstall for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Tunstall
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include a bath that stays dull however much you clean it and a coloured bath you want in white, on Victorian roll-tops, acrylic baths and cast iron baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Tunstall (ST6, ST5)
- Region
- Stoke-on-Trent
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Tunstall?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- We leave the room as we found it
- Fixed prices from your pictures
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
See our prices page and bath cost comparison.
Honest limits
It helps to know what we can’t do:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Signs you need bath re-enamelling in Tunstall
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Most people get in touch when they notice one of these:
- A roll-top that is seen better days
- Worn patches where water runs and sits
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
Comparing quotes
- How long it needs to cure
- How the room is protected while they work
- What aftercare is recommended
- Whether they match the colour on site
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a full day, tidy-up included.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the next day.
How to prepare
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Get any chip repaired quickly
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Don’t leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Also near Tunstall
Also in Tunstall
Covering Tunstall
Tunstall is about 3 miles north of Newcastle-under-Lyme, in Stoke-on-Trent. Our technicians come to clients in Tunstall and the surrounding area, so nothing has to leave your home. We cover 59 places across Stoke-on-Trent. We work right across the region, from Tunstall to Manchester (29 miles away).
Here we cover the ST6 and ST5 postcode area. From High Lane, Canal Lane and Linda Road or a nearby road, we can come to you. Being close to the A527 and A5271, Tunstall is easy for our technicians to reach. We also travel to Longport (1 mile south), Goldenhill (1 mile north), Bradwell (1 mile south-west), Packmoor (2 miles north) and Porthill (2 miles south). Larger places within reach include Stoke-on-Trent (3 miles south-east), Hanley (3 miles south-east), Stoke-upon-Trent (4 miles south), Fenton (5 miles south-east), Penkhull (4 miles south) and Birches Head (3 miles south-east). Tunstall is one of the larger places we cover in Stoke-on-Trent.
Landmarks near Tunstall
Our customers here include homes close to The Co-operative Academy of Stoke-on-Trent, The Co-operative Academy of Stoke-on-Trent and Christ Church. Also close by are St Mary's Church of England Primary School (within half a mile south-west) and The Vine Public House (0.8 miles north-east). For rail, the closest station is Longport station, roughly 1.1 miles south of the centre. Nearby you will also find Smallthorne Urban District (1.9 miles south-east) and Haywood Hospital (0.9 miles east). For a walk, there is Parrot's Drumble and Bignall Hill.
Common questions in Tunstall
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Are there extra charges for Tunstall?
There’s no separate call-out charge. Your fixed price includes everything.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Landlords, agents and businesses in Tunstall
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
