Pembrokeshire · Wales

Bath re-enamelling & resurfacing in Pennar, Pembrokeshire

Bath re-enamelling for Pennar, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Pennar

Bath re-enamelling at your home in Pennar

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We’re often asked to fix a period or roll-top bath worth keeping and stains that won’t shift, in basins & shower trays, pressed steel baths and cast iron baths.

A one-year guarantee comes as standard, so you’re not left on your own once we have gone.

Roll-top bath being refinished by a Surface Doctor technician
Area
Pennar (SA72)
Area hub
Pembrokeshire
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Pennar and the surrounding area

Pennar is about 2 miles north-west of Pembroke, in Pembrokeshire. Across the SA72 area, a technician comes to you. Pennar is one of 223 towns and villages in Pembrokeshire we cover.

We work across the SA72 postcode area. From Fort Road, Beach Road and Ferry Road or a nearby road, a technician can come to you. Other places close to Pennar include Llanreath (1 mile north-west), Pembroke Dock (1 mile north-east), Pennar Park (1 mile west), Llanion (1 mile north-east) and Hundleton (1 mile south). Further out, we also cover Haverfordwest (8 miles north), Milford Haven (4 miles north-west), The Marsh (8 miles north), Dinbych-y-Pysgod (11 miles east), The Green (11 miles east) and Pill (4 miles north-west).

What’s near Pennar

Our clients here include homes close to Ysgol Harri Tudur/Henry Tudor School, The Royal Oak pub and Pennar Community School and the streets around them. Pennar’s nearest station is Pembroke Dock station, roughly 1 mile north-east of the centre. Nearby you will also find Pembroke Castle (1.6 miles east) and South Pembrokeshire Hospital (0.5 miles north). For a walk, there is Pembroke River lower and Stackpole Estate.

  • Local facilities include Pembroke Dock: Llanion (1.3 miles north-east)
Map of Pennar © OpenStreetMap contributors

What we do, step by step

You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. It usually takes the best part of a day, and you can get on with other things while we’re there.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s typically ready the next day.

Preparing for the visit

  • Keep a parking space free if you can
  • Keep pets and children out of the room while we work
  • Tell us if there are stairs or a lift

Ask for a price

Most customers in Pennar get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed price

Read more

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

We work for landlords, letting agents and housing providers in Pennar as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Pennar questions

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What happens after I send pictures?

We come back with a fixed quote, generally with dates to choose from. You are under no obligation.

Can you price it without visiting?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Do you resurface freestanding baths?

Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

When to call us in Pennar

A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.

Contact us if you’ve noticed:

  • A peeling or bubbling previous coating
  • A dull, rough surface that won’t come clean
  • An original cast iron bath that needs restoring
  • Wear marks under the taps

What your quote should include

  • Who will actually do the work
  • A fixed quote, and whether VAT is included
  • What preparation is included
  • Whether they match the colour on site

10 questions to ask before booking

Looking after it afterwards

Nothing complicated is needed:

  • Keep suction mats out of the bath
  • Have chips seen to early
  • Do not let dyes or oils sit on the finish
  • A dripping tap should be fixed promptly

Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Repair or replace in Pennar?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the next day. Prices start from £350. The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.

Why choose Surface Doctor in Pennar

  • Honest advice, even when it means no job
  • A year’s guarantee on all work
  • Same prices wherever you are
  • We come to you, anywhere in the UK

Take a look at our full price list or resurfacing vs replacement cost guide.

How we price bath re-enamelling

Resurfacing from £350. There is no area surcharge for Pennar. What changes the price is:

  • Whether old repairs or coatings need taking off
  • How many items we do on one visit
  • How much damage there is
  • What the surface is made of

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Getting a price from pictures

Most quotes are done from photos alone. To make it quick:

  • Whether it’s been repaired or coated before
  • A photo taken from further back
  • Any details about the material
  • Natural light rather than flash

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.