Warwickshire · England
Bath Re-enamelling for Pillerton Hersey homes
Bath re-enamelling in and around Pillerton Hersey: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Stains that won’t shift
How we handle bath re-enamelling in Pillerton Hersey
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with chips and rust in more than one place and stains that won’t shift, we can typically put it right, whatever the material.
All our work is covered by a one-year guarantee, wherever you are in Warwickshire.
- Location
- Pillerton Hersey (CV35)
- Area hub
- Warwickshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Pillerton Hersey
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Questions to ask before you book
- What preparation is included
- How the room is protected while they work
- What happens if the damage is worse than the photos show
- If travel is included in the price
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Pillerton Hersey. The price depends on:
- Previous DIY repairs that have to come out
- The type of damage
- Where the damage is and how we get to it
- The size and number of damaged areas
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
You can typically get a fixed quote without us visiting. To help us price it:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
What a repair cannot fix
We won’t take on work that will not last, so these are the limits:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow most of the day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Related advice
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Pillerton Hersey: your questions answered
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Do you work in Pillerton Hersey?
We do. We send a technician to Pillerton Hersey for every job, and the price is the same as everywhere else.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Nothing taken out or refitted
- Rooms protected and left tidy
- Colour mixed on the day to match
- One-year guarantee on every repair
See our full price list and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Nearby places to Pillerton Hersey
More services for Pillerton Hersey
About Pillerton Hersey
Pillerton Hersey is about 8 miles south-east of Stratford-upon-Avon, in Warwickshire. From the centre of Pillerton Hersey to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Pillerton Hersey is one of 324 towns and villages in Warwickshire where we work. Our jobs stretch from Pillerton Hersey to Birmingham (27 miles away).
We cover every part of CV35. Whether you live on Oxhill Bridle Road and Watery Lane or a nearby road, we can come to you. Other places close to Pillerton Hersey include Pillerton Priors (1 mile south-west), Butlers Marston (1 mile north-east), Combrook (2 miles north), Oxhill (2 miles south) and Little Kineton (2 miles north-east). Further out, we also cover Warwick (10 miles north), Royal Leamington Spa (11 miles north), Stratford-upon-Avon (8 miles north-west), Leamington Spa (11 miles north), Kenilworth (14 miles north) and Southam (11 miles north-east).
Local landmarks in Pillerton Hersey
We visit homes around Church of St Mary the Virgin and the streets around them. Well-known places in the area include Compton Verney (2.6 miles north) and Ellen Badger Hospital (5.5 miles south-west). For a walk, there’s Edge Hill.
Looking after it afterwards
Once the work has cured, treat it gently:
- Wash away dyes and oils after use
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Have chips seen to early
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
