Warwickshire · England
Bath re-enamelling & resurfacing in Butlers Marston, Warwickshire
We travel to Butlers Marston for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating
About our bath re-enamelling in Butlers Marston
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and people most often call us about a coating lifting around the plughole and a bath that stays dull however much you clean it.
You get a one-year guarantee, the same in Butlers Marston as everywhere else we work.
- Location
- Butlers Marston (CV35)
- Region
- Warwickshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Butlers Marston?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
See our pricing or guide to resurfacing and replacement costs.
Also near Butlers Marston
Other services in Butlers Marston
Covering Butlers Marston
Butlers Marston is about 8 miles south-east of Stratford-upon-Avon, in Warwickshire. Whether you’re in the middle of Butlers Marston or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover 324 places in Warwickshire. Our jobs stretch from Butlers Marston to Birmingham (about 27 miles away).
Postcode districts we cover here: CV35. Local streets include Bank View, Town Ground and Bank Close, and we cover them all. Close by, we cover Little Kineton (1 mile east), Combrook (1 mile north-west), Pillerton Hersey (1 mile south-west), Kineton (1 mile north-east) and Compton Verney (2 miles north). Within a short drive, we also cover Warwick (9 miles north), Royal Leamington Spa (10 miles north), Stratford-upon-Avon (8 miles north-west), Leamington Spa (10 miles north), Kenilworth (14 miles north) and Southam (10 miles north-east).
Local landmarks in Butlers Marston
Around Butlers Marston, we work in homes near Kineton High School and Church of Saints Peter and Paul, among other places. A little further out are King John's Castle (0.9 miles north-east) and Compton Verney (1.8 miles north). The countryside around Butlers Marston includes Edge Hill.
What we are called out for in Butlers Marston
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
People typically call us when they notice something like this:
- Several chips and rust patches
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
What your quote should include
- Who will actually do the work
- What aftercare is recommended
- What happens if the damage is worse than the photos show
- Whether they match the colour on site
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the day after.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Butlers Marston: your questions answered
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you cover Butlers Marston?
Yes, we do. We send a technician to Butlers Marston for every job, and the price is the same as everywhere else.
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What affects the price in Butlers Marston
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Previous DIY repairs that have to come out
- What kind of damage it is
- How many areas need work
- Where the damage is and how we get to it
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what helps:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Any details about the material
- Your postcode, so we can check dates
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
