Greater London · England
Bath Re-enamelling in Pinner
Fixed-price bath re-enamelling in Pinner and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Enamel that’s lost its shine and feels rough
Covering Pinner
Pinner is about 1 mile north-east of Ruislip, in Greater London. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 764 places in Greater London, from the larger towns to small villages. Our nearest city page is London, about 14 miles away.
Every address in HA5 is within our area. Streets in the area include Love Lane, Tudor Road and Marsh Road, and we cover them all. Other places close to Pinner include Pinner Green (1 mile north-west), Eastcote (1 mile south), North Harrow (1 mile south-east), Roxbourne (1 mile south) and Rayners Lane (2 miles south-east). We also work in nearby towns such as London (14 miles south-east), City of Westminster (12 miles south-east), Marylebone (12 miles south-east), Kensington (10 miles south-east), St Pancras (13 miles east) and Shoreditch (14 miles east).
What’s near Pinner
We visit homes around West Lodge Primary School, Pinner High School and Heathfield School and the streets around them. Other local landmarks include Christian Science Church (under half a mile north-east), The Oddfellows Arms (within half a mile north-east) and Eastcote House Gardens (0.7 miles south-west). Pinner’s nearest station is Hatch End station, roughly 1.4 miles north-east of the centre. Nearby you will also find Northwood and Pinner Cottage Hospital (1.3 miles north-west) and St. George's Shopping Centre (2.3 miles east). For a walk, there is Horse Shoe Bay and Northala Fields.
About our bath re-enamelling in Pinner
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair Victorian roll-tops, basins & shower trays and acrylic baths, and people most often call us about stains that won’t shift and a bath in a colour that no longer suits.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Where
- Pinner (HA5)
- Area hub
- Greater London
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Questions from Pinner
Which areas do you work in?
Everywhere in the UK, Pinner included. There’s no extra charge for travel.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
How do I get a price for bath re-enamelling in Pinner?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Avoid suction-cup mats
- Have chips seen to early
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Landlord and trade work in Pinner
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Repairing versus replacing in Pinner
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Pinner clients choose us
- Colour mixed on the day to match
- Same prices wherever you are
- Nothing taken out or refitted
- We come to you, anywhere in the UK
See our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Pinner. What changes the price is:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
You can take the pictures on your phone. Just make sure we can see:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- One sharp close-up of the damage
- Details of any past repairs
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Nearby places to Pinner
More services for Pinner
Signs you need bath re-enamelling in Pinner
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a picture if you notice any of these:
- Lots of chips and rust spots
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
What your quote should include
- Whether they match the colour on site
- How to look after the finish
- Who will actually do the work
- What the guarantee covers, and for how long
Honest limits
A repair isn’t always the answer, and we would rather say so up front. We can’t fix:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
Send us photos and we will tell you honestly before you book.
Materials we work on in Pinner
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
