Warwickshire · England
Bath Re-enamelling in Pinwall
Full bath re-enamelling and resurfacing in Pinwall, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- An old resurfacing that is failing
Bath re-enamelling in Pinwall without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on pressed steel baths, cast iron baths and basins & shower trays, and people most often call us about an original cast iron bath that needs restoring and staining under the taps and around the waste.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Pinwall (CV9)
- Area hub
- Warwickshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Respect the curing time we give you
- Repair dripping taps early
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs right away
Dry the bath after use if possible, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
What a repair can’t fix
In fairness, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Landlords, agents and businesses in Pinwall
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
How to get a price
To get a price, send a couple of pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
Do you need bath re-enamelling in Pinwall?
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
You may need us if you’ve spotted any of these:
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
- A roll-top that is seen better days
- An old resurfacing that is failing
Before booking anyone
- How the colour is matched
- What protection goes down before work starts
- Who turns up on the day
- What prep work is covered
Pinwall and nearby
Pinwall is about 6 miles north-west of Nuneaton, in Warwickshire. We visit homes and businesses in Pinwall, so you do not need to take anything anywhere. Pinwall is one of 324 towns and villages in Warwickshire we cover. We work right across the region, from Pinwall to Birmingham (17 miles away).
Our technicians cover all of the CV9 postcode area. From Pinwall Lane, Atherstone Road and Sheepy Road or a nearby road, we can come to you. Close by, we cover Whittington (1 mile south-west), Ratcliffe Culey (1 mile east), Atherstone (1 mile south), Witherley (2 miles south-east) and Merevale (2 miles south-west). Further out, we also cover Nuneaton (6 miles south-east), Bedworth (9 miles south), Fordbridge (12 miles south-west), Castle Vale (11 miles south-west), Chilvers Coton (7 miles south-east) and Camp Hill (5 miles south).
What’s near Pinwall
Around Pinwall, we work in homes near The Queen Elizabeth Academy and Church of All Saints. For rail, the closest station is Atherstone station, about 1.4 miles south of the centre. Other landmarks nearby include Atherstone Heritage Centre (1.4 miles south) and Ratcliffe Culey (1.2 miles south-east).
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Pinwall questions
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
Should you replace it?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Pinwall. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Typically one visit, start to finish
- We will tell you if it’s not worth repairing
- A year’s guarantee on all work
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- What kind of damage it is
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The colour and finish to match
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Also near Pinwall
Also in Pinwall
About our accreditations · Every repair comes with a one-year guarantee.
