Herefordshire · England
Bath Re-enamelling for Pipe and Lyde homes
Bath re-enamelling in and around Pipe and Lyde: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
Bath re-enamelling in Pipe and Lyde without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Our technicians work on acrylic baths, cast iron baths and basins & shower trays, and common reasons people contact us are a dull, rough surface that won’t come clean and a bath in a colour that no longer suits.
Every job is backed for twelve months in Pipe and Lyde and everywhere else. If something goes wrong with the work, we come back.
- Area
- Pipe and Lyde (HR1, HR4)
- Region
- Herefordshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Also near Pipe and Lyde
More services for Pipe and Lyde
What affects the price in Pipe and Lyde
Resurfacing from £350. We charge the same across the UK, including Pipe and Lyde. What changes the price is:
- Doing more than one item at once
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Quotes from your pictures
We price nearly every job from photos. This is what to send:
- A clear, close picture of the problem area
- Something in shot to show the size
- What it’s made of, if you know
- Details of any past repairs
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Repairing versus replacing in Pipe and Lyde
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Pipe and Lyde
- One visit for most repairs
- Work done at your home or business
- CHAS and Constructionline accredited
- We leave the room as we found it
See our pricing or guide to resurfacing and replacement costs.
Pipe and Lyde questions
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
What areas do you cover?
The whole UK, including all of Herefordshire. Send your postcode with your photos and we’ll offer you dates.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Are there extra charges for Pipe and Lyde?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What we’re called out for in Pipe and Lyde
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Common reasons people in Pipe and Lyde contact us include:
- A bath in a colour that no longer suits
- Stains that won’t shift
- Wear marks under the taps
- A roll-top that’s seen better days
Comparing quotes
- How long it needs to cure
- How the colour is matched
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
For anyone letting property in or around Pipe and Lyde, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Looking after it afterwards
To keep it looking its best:
- Rinse off hair dye, oils and bath bombs immediately
- Do not use the bath until it has fully cured
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How it works
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Advice
Pipe and Lyde and the surrounding area
Pipe and Lyde is about 3 miles north of Hereford, in Herefordshire. Across the HR1 area, we come to you. Pipe and Lyde is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from Pipe and Lyde to Birmingham (about 44 miles away).
We work across HR1 and HR4. Streets in the area include Church Road and Hither Bush. Close by, we cover Upper Lyde (1 mile west), Holmer (1 mile south), Burghill (1 mile south-west), Bobblestock (2 miles south-west) and Huntington (2 miles south-west). Within a short drive, we also cover Hereford (3 miles south), Ross-on-Wye (14 miles south-east), Ledbury (13 miles east), Leominster (9 miles north), Redhill (4 miles south) and Newton Farm (4 miles south).
Local landmarks in Pipe and Lyde
In Pipe and Lyde, that means homes near Whitecross Hereford and Church of St Peter, among other places. Pipe and Lyde’s nearest station is Hereford station, about 2.6 miles south. A little further out are Churchill House Museum & Hatton Gallery (2.4 miles south-east) and St. Mary's Hospital (1.5 miles south-west). Green spaces nearby include Merryhill and Lugg Meadow.
About our accreditations · Every repair comes with a one-year guarantee.
