Shropshire · England
Bath Re-enamelling for Pipe Aston homes
Full bath re-enamelling and resurfacing for homes and businesses in Pipe Aston and across Shropshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
How to care for the repair
Simple care helps the repair last. Our advice:
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Do not let dyes or oils sit on the finish
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our bath re-enamelling in Pipe Aston
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for several chips and rust patches and enamel that’s lost its shine and feels rough, in Victorian roll-tops, basins & shower trays and acrylic baths.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Pipe Aston (SY8)
- Area hub
- Shropshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Pipe Aston
Also in Pipe Aston
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Getting a price
Send us photos of the damage and one of the whole item, and tell us you are in Pipe Aston, and we will come back with a fixed quote.
Related advice
Landlords, agents and businesses in Pipe Aston
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What affects the price in Pipe Aston
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- Unusual colours or finishes
- The type of damage
- The material and finish
- How many areas need work
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Details of any past repairs
- Natural light rather than flash
- One picture of the entire bath
- Any details about the material
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
When to call us in Pipe Aston
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Look out for these signs:
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
- A roll-top that’s seen better days
Before you book anyone
- What happens if the damage is worse than the photos show
- Who will actually do the work
- What preparation is included
- How long it needs to cure
About Pipe Aston
Pipe Aston is about 20 miles north of Hereford, in Shropshire. From the centre of Pipe Aston to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 433 places in Shropshire. You can also see our page for Birmingham, about 39 miles away.
Postcode districts we cover here: SY8. We also cover the places around Pipe Aston: Elton (1 mile south), Batchcott (2 miles east), Richards Castle (2 miles south-east), Mitnell (3 miles south-east) and Broad Green (3 miles south-east). We also work in nearby towns such as Ludlow (4 miles north-east), Church Stretton (13 miles north), Craven Arms (7 miles north), Cleobury Mortimer (13 miles east), Bishop's Castle (14 miles north-west) and Clun (11 miles north-west).
Landmarks near Pipe Aston
Locally, our jobs take us to homes close to Church of St Giles, among other places. Pipe Aston’s nearest station is Ludlow station, roughly 3.8 miles north-east of the centre. Other landmarks nearby include Ludlow Community Hospital (3.9 miles north-east) and Bromfield moated grange (3.2 miles north). The countryside around Pipe Aston includes High Vinnalls.
When a repair isn’t the answer
A repair is not right for every job, for example:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
FAQs for Pipe Aston
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
