Perth and Kinross · Scotland
Bath Re-enamelling for Pitlochry homes
Our technicians come to Pitlochry for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Bath re-enamelling in Pitlochry without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include stains that won’t shift and a roll-top that’s seen better days, across cast iron baths, acrylic baths and basins & shower trays.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Area
- Pitlochry (PH16)
- Area hub
- Perth and Kinross
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
About Pitlochry
Pitlochry is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Across the PH16 area, we come to you. We cover 107 places across Perth and Kinross, from the larger towns to small villages. Our jobs stretch from Pitlochry to Edinburgh (about 56 miles away).
Postcode districts we cover here: PH16. Streets in the area include Church Road, Station Road and Well Brae, all of which we cover. Pitlochry is on the A924, so it’s easy for us to reach. Other places close to Pitlochry include Port na Craig (1 mile south), Moulin (1 mile north), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (4 miles south-west). Being one of Perth and Kinross’s larger places, Pitlochry is somewhere we visit frequently.
What’s near Pitlochry
Typical jobs here are in homes near The Old Mill Inn, Faskally Forest and Pitlochry Church of Scotland, among other places. There is a railway station in Pitlochry itself: Pitlochry station. A little further out are Pitlochry Community Hospital (within half a mile south-west) and Atholl Palace Museum (under half a mile south-east). The countryside around Pitlochry includes Loch na Bà.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- A year’s guarantee on all work
- Usually one visit, start to finish
- Repair technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and resurfacing vs replacement cost guide.
Landlord and trade work in Pitlochry
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Point us to the nearest place to park
- Open a window if you can
- Tell us about any previous repairs or coatings
How to get a price
Upload photos of the damage and one of the whole item, and tell us you’re in Pitlochry, and we’ll reply with a fixed price.
Related advice
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price is based on:
- The material
- The type of damage
- Doing more than one item at once
- How easy the damage is to reach
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- Something in shot to show the size
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Common problems we fix in Pitlochry
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
People normally call us after spotting something like this:
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Before you book anyone
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- A fixed quote, and whether VAT is included
- How to care for the finish
When a repair is not the answer
We will always be straight with you, so here’s what a repair cannot fix:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Send us photos and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Your questions about bath re-enamelling in Pitlochry
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do you cover the whole of Perth and Kinross?
Everywhere in the UK, Pitlochry included. Travel is included in the price.
Nearby places to Pitlochry
More services for Pitlochry
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
