Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Moulin, Perth and Kinross
Bath re-enamelling for Moulin, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
How we handle bath re-enamelling in Moulin
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We work on basins & shower trays, cast iron baths and pressed steel baths, and people most frequently call us about brown or grey marks that don’t clean off and a period or roll-top bath worth keeping.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Moulin (PH16)
- Area hub
- Perth and Kinross
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Moulin
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The things customers usually mention when they call are:
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether they match the colour on site
- What prep work is covered
- A fixed quote, and whether VAT is included
- How changes to the job are handled
Work for landlords and builders
If you manage property in Moulin, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Landlords, letting agents and housing providers in Moulin use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Where we work around Moulin
Moulin is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Whether you are in the middle of Moulin or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Moulin is one of 107 towns and villages in Perth and Kinross where we work. We work right across the region, from Moulin to Edinburgh (about 57 miles away).
Our visits in PH16 work the same way as everywhere else we cover. Local streets include Manse Road, Duff Avenue and Baledmund Road, and we cover them all. If you are just outside Moulin, we cover Pitlochry (1 mile south), Port na Craig (1 mile south), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (5 miles south-west).
Near you in Moulin
Our clients here include homes close to The Old Mill Inn, Faskally Forest and Moulin Church. The closest station to Moulin is Pitlochry station, roughly 0.8 miles south-west. Well-known places in the area include Pitlochry Community Hospital (0.9 miles south-west) and Black Castle of Moulin (within half a mile south-east). Green spaces nearby include Loch Broom.
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes most of the day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Nearby places to Moulin
More services for Moulin
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- How many areas need work
- Doing more than one item at once
- Previous DIY repairs that have to come out
- What the surface is made of
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A wider photo showing the whole bath
- What it’s made of, if you know
- A clear, close picture of the problem area
- Where you are, by postcode
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- One price list for the whole UK
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
Read our pricing and guide to resurfacing and replacement costs.
Moulin questions
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Can you do the outside of a roll-top?
Yes. Inside and out.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs immediately
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
