Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Ballinluig, Perth and Kinross
Full bath re-enamelling and resurfacing in Ballinluig, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Bath re-enamelling in Ballinluig, done in place
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you’re dealing with enamel that’s lost its shine and feels rough and wear marks under the taps, we can help.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Area
- Ballinluig (PH9)
- Region
- Perth and Kinross
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Ballinluig: your questions answered
How much does bath re-enamelling cost in Ballinluig?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
How do I book?
Use the quote form or ring 0345 017 0787.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
Do you need bath re-enamelling in Ballinluig?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Customers usually contact us about:
- A coloured bath you want in white
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- Stains that won’t shift
What to look for in a quote
- How long the guarantee is and what it covers
- How to look after the finish
- If travel is included in the price
- Who will actually do the work
What affects the price in Ballinluig
Resurfacing from £350. We price every job individually. What matters most is:
- How much damage there is
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
To get a price, send two or three pictures using our quote form or ring us. We’ll say straight away if a repair is the right fix.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What a repair can’t fix
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- Problems we can’t see until an old finish comes off
- A bath that is rusted through
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Nearby places to Ballinluig
More services for Ballinluig
How it works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow the best part of a day.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Before we arrive
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Colour-matched on site
- Honest advice, even when it means no job
- Everything repaired in place
- No extra charge for your area
Take a look at our prices page and resurfacing vs replacement cost guide.
How to look after the repair
Most damage we see is avoidable. A few tips:
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Our work in Ballinluig
Ballinluig is about 14 miles west of Blairgowrie and Rattray, in Perth and Kinross. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Ballinluig is one of 107 places in Perth and Kinross where we work. You can also see our page for Edinburgh, about 52 miles away.
All of PH9 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Buail Bhan, Broom Hill and Braeside Road. If you’re just outside Ballinluig, we cover Logierait (1 mile south-west), Dowally (3 miles south-east), Port na Craig (4 miles north-west), Pitlochry (4 miles north-west) and Grandtully (4 miles west). We also work in nearby towns such as Blairgowrie and Rattray (14 miles east), Rattray (14 miles east), Aberfeldy (8 miles west), Stanley (15 miles south-east) and Bankfoot (12 miles south-east).
Landmarks near Ballinluig
Typical jobs here are in homes near Logierait Parish Church, among other places. Ballinluig’s nearest station is Pitlochry station, about 4 miles north-west of the centre. Further afield, we also cover the area around Pitlochry Community Hospital (4 miles north-west) and Atholl Palace Museum (3.6 miles north-west). For a walk, there is Lochan Oisinneach Mòr.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
