Kent · England
Bath Re-enamelling for Platt homes
Full bath re-enamelling and resurfacing at your home in Platt, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
About our bath re-enamelling in Platt
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you’re dealing with a coating lifting around the plughole and lots of chips and rust spots, we can usually put it right.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Platt (TN15)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Covering Platt
Platt is about 6 miles east of Sevenoaks, in Kent. We visit homes and businesses in Platt and nearby villages, so there is no workshop to go to. We cover all 922 towns and villages in Kent. You can also see our page for London, about 23 miles away.
Our visits in TN15 are booked in the same way as anywhere else. That includes homes on St Mary's Close, Grange Road and Platt Common and the roads around them. Other places close to Platt include Comp (1 mile south-east), Borough Green (1 mile west), Crouch (1 mile south-west), Wrotham Heath (1 mile north-east) and Basted (1 mile south-west). Larger places within reach include Maidstone (9 miles east), Dartford (12 miles north-west), Sevenoaks (6 miles west), Royal Tunbridge Wells (11 miles south), Gravesend (10 miles north) and Tonbridge (7 miles south).
Local landmarks in Platt
Typical jobs here are in homes near Wrotham School, The Blue Anchor pub and Wrotham School. You will also find Church of St Mary (less than half a mile south-west) and Platt Church of England Voluntary Aided Primary School (within half a mile north). Platt’s nearest station is Borough Green & Wrotham station, about 0.9 miles west. A little further out are Ightham Court (1.8 miles west) and Beechin Wood Archery Museum (within half a mile south-east).
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Materials we work on in Platt
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Nearby places to Platt
Other services in Platt
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Our prices are the same across the UK, so there is no premium for Platt. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Platt customers choose us
- Same prices wherever you are
- Nothing taken out or refitted
- Colour-matched on site
- Honest advice, even when it means no job
Read our full price list or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Keeping it looking good
Nothing complicated is needed:
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
- Never use suction bath mats
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We clean up when we are done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Get a quote
Most customers in Platt get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Questions from Platt
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
How much does bath re-enamelling cost in Platt?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item with your TN15 postcode.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your pictures and you will get one combined price.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- Doing more than one item at once
- The size and number of damaged areas
- The material
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- Where you are, by postcode
- Any earlier repairs or coatings
- Natural light rather than flash
- A wider photo showing the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
