County Durham · England
Bath Re-enamelling for Plawsworth homes
Bath re-enamelling for Plawsworth, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- A roll-top that’s seen better days
Bath re-enamelling at your home in Plawsworth
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair Victorian roll-tops, basins & shower trays and acrylic baths, and the jobs we see most are several chips and rust patches and a coating lifting around the plughole.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Plawsworth (DH2)
- Area hub
- County Durham
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Plawsworth
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you cover the whole of County Durham?
We cover the entire UK, including Plawsworth and the rest of County Durham. Just include your postcode and we will offer you dates.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Why repair rather than replace?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why Plawsworth clients choose us
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
- One visit for most repairs
See our pricing and bath cost comparison.
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job. The main factors are:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- How much damage there is
- How easy the damage is to reach
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- A wider photo showing the entire bath
- What it’s made of, if you know
For a price in Plawsworth, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Looking after it afterwards
So the finish stays in good condition:
- Avoid suction-cup mats
- Have chips seen to early
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs right away
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
When to call us in Plawsworth
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Keep an eye out for any of the following:
- Stains that will not shift
- Chips and rust in more than one place
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
Before you book anyone
- How the colour is matched
- How long it needs to cure
- What preparation is included
- How to care for the finish
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a repair can’t fix
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Plawsworth
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Covering Plawsworth
Plawsworth is about 2 miles south of Chester-le-Street, in County Durham. From the centre of Plawsworth to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 329 towns and villages across County Durham, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 11 miles away.
All of DH2 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Tan Hills (1 mile south-west), Kimblesworth (1 mile south-west), Chester Moor (1 mile north), Pity Me (2 miles south) and Chester-le-Street (2 miles north). Further out, we also cover Durham (3 miles south), Consett (10 miles west), Newton Aycliffe (14 miles south), Bishop Auckland (13 miles south), Spennymoor (9 miles south) and Seaham (10 miles east).
Around Plawsworth
Typical jobs here are in homes near Nettlesworth Primary School, Fyndoune Community College and St Philip and St James. The closest station to Plawsworth is Chester-Le-Street station, about 2.1 miles north of the centre. Further afield, we also cover the area around Chester Le Street Hospital (1.9 miles north) and The Gates Shopping Centre (3.4 miles south).
- Local facilities include Chester-le-Street (2.5 miles north)
What happens on the day
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Ensure the area is dry
- Have a window or extractor fan available
- Let us know which floor the room is on
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Read more
Places near Plawsworth
Other services in Plawsworth
About our accreditations · Every repair comes with a one-year guarantee.
