Isles of Scilly · England

Bath Re-enamelling for Porthloo homes

Bath re-enamelling for Porthloo, without a refit. Send us photos for a fixed quote, then book a visit.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Porthloo

Landlord and trade work in Porthloo

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

For anyone letting property in or around Porthloo, we can repair and quote for several addresses together. Send photos for each one and we will price them together.

Bath re-enamelling at your home in Porthloo

Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with chips and rust in more than one place and a coloured bath you want in white, we can help.

The work is covered for a year after we finish. Just call us if there is a problem and we will come back.

Roll-top bath being refinished by a Surface Doctor technician
Location
Porthloo (TR21)
Area hub
Isles of Scilly
Cover
One year on every repair
Quotes
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

What bath re-enamelling costs

Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:

  • Access to the area
  • The size and number of damaged areas
  • How hard the colour is to match
  • The material

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Quotes from your pictures

You can take the pictures on your phone. Ensure they show:

  • Where you are, by postcode
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash
  • Whether it’s been repaired or coated before

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed quote, not an estimate.

What happens on the day

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can usually be used the following day.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can
  • Let us know about parking or access

Getting a price

Email us photos of the damage and one of the whole item, with your TR21 postcode, and we’ll reply with a fixed quote.

Send photos for a quote

Read more

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Cast iron

Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Looking after it afterwards

Aftercare is simple:

  • Do not leave bottles, razors or sponges standing on the surface
  • Never use suction bath mats
  • Fix dripping taps quickly
  • Get any chip repaired quickly

Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

FAQs for Porthloo

Does the bath have to be removed?

Not at all. Everything is done in your bathroom, with the room protected and ventilated.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Which areas do you work in?

The entire UK, including all of the Isles of Scilly. Send your postcode with your photos and we will confirm dates.

How do I get a price for bath re-enamelling in Porthloo?

Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your TR21 postcode.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Is the work guaranteed?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

Signs you need bath re-enamelling in Porthloo

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

The things customers usually mention when they call are:

  • Worn patches where water runs and sits
  • Lots of chips and rust spots
  • A coating lifting around the plughole
  • Stains that won’t shift

Comparing quotes

  • Who turns up on the day
  • Whether cleaning and preparation are in the price
  • How long it needs to cure
  • How to look after the finish

10 questions to ask before booking

Where we work around Porthloo

Porthloo is about 37 miles west of Penzance, in the Isles of Scilly. Wherever you are in the TR21 postcode area, we come to you. We work in 13 places in the Isles of Scilly, from the larger towns to small villages.

We work across TR21 and the streets around it. That includes homes on Town Lane, Porth Loo Lane and Telegraph Road. If you’re just outside Porthloo, we cover Telegraph (1 mile north-east), Hugh Town (1 mile south), Maypole (1 mile east), Old Town (1 mile south-east) and Trenoweth (1 mile north-east). Some remote addresses need extra planning, so call us to arrange it.

Near you in Porthloo

Typical jobs here are in homes near St Mary's Church and Mermaid Inn. A little further out are St Mary's Hospital (0.7 miles south) and Ennor Castle (0.7 miles south-east). Not far away are Mount Todden and Abbey Pool.

Map of Porthloo © OpenStreetMap contributors

What a repair cannot fix

It helps to know what we cannot do:

  • A bath split right through the body
  • A poorly supported acrylic bath, until it’s firmed up
  • A bath that’s rusted through

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.