Argyll and Bute · Scotland

Bath re-enamelling & resurfacing in Portnahaven, Argyll and Bute

We travel to Portnahaven for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Portnahaven

Signs you need bath re-enamelling in Portnahaven

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

People generally call us after spotting something like this:

  • A dull, rough surface that won’t come clean
  • Chips and rust in more than one place
  • A bath in a colour that no longer suits
  • A period or roll-top bath worth keeping

Before you book anyone

  • Who turns up on the day
  • What the guarantee covers, and for how long
  • What prep work is covered
  • How the colour is matched

How to compare quotes

Bath re-enamelling in Portnahaven, done in place

A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We’re frequently asked to fix worn patches where water runs and sits and a peeling or bubbling previous coating, in Victorian roll-tops, basins & shower trays and acrylic baths.

All of our repairs are guaranteed for twelve months in Portnahaven and everywhere else. If something goes wrong with the work, we come back.

Stained basin resurfaced to clean white (before and after)
Where
Portnahaven (PA47)
Area hub
Argyll and Bute
Cover
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

When a repair isn’t the answer

Not everything can be repaired, and we will tell you before we start. We can’t fix:

  • Steel that has corroded right through
  • Leaking taps or wastes (a plumber’s job)
  • Damage hidden under a previous coating, until it’s stripped back

Send us pictures and we’ll tell you honestly before you book.

Materials we repair

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths

Portnahaven: your questions answered

Will there be a smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.

Will the new finish last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so mention it when you send photos.

Will the bath be moved?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

How soon can you come?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Does re-enamelling smell?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Repair or replace: which is better?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Portnahaven

  • Usually one visit, start to finish
  • We will tell you if it’s not worth repairing
  • A fixed quote before booking
  • CHAS, Constructionline and SafeContractor accredited

See our full price list and resurfacing vs replacement cost guide.

Aftercare tips

To keep it looking its best:

  • Store bottles off the bath
  • Use washing-up liquid and a soft cloth
  • Wash away dyes and oils after use
  • Get any chip repaired quickly

Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

What we do, step by step

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. The bath is left to cure and can generally be used the day after.

Before we arrive

  • Keep a parking space free if you can
  • Tell us if there are stairs or a lift
  • Mention any earlier repairs or resurfacing

How to get a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Send pictures for a quote

Read more

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Portnahaven and nearby

Portnahaven (Gaelic: Port na h-Abhainne) is about 33 miles north of Bushmills, in Argyll and Bute. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Portnahaven is one of 118 towns and villages in Argyll and Bute where we work.

Our technicians cover all of the PA47 postcode area. You will find streets such as High Street, Shore Street and Church Street. Close by, we cover Bun Othan (1 mile south), Port Charlotte (6 miles north-east), Bowmore (10 miles north-east), Imeraval (12 miles east) and Port Ellen (13 miles east). Remote and island addresses take a little more planning, so it’s best to call first.

Around Portnahaven

Our customers here include homes close to Portnahaven Church, among other places. The countryside around Portnahaven includes Beinn Tart a' Mhill.

Map of Portnahaven © OpenStreetMap contributors

Prices and what affects them

Resurfacing from £350. You will know the full cost before booking. We take into account:

  • What kind of damage it is
  • Access to the area
  • How many items we do on one visit
  • How hard the colour is to match

We charge the same wherever you are, so there is no premium for Portnahaven. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from pictures

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • Any details about the material
  • A coin or ruler next to the damage for scale

Email us photos of the damage and one of the whole item, with your PA47 postcode, and we will reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.