Argyll and Bute · Scotland
Non-slip bath & shower coating in Portnahaven, Argyll and Bute
Local non-slip bath coating for Portnahaven: photo quotes, tidy work and a year’s guarantee.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Non-slip bath coating in Portnahaven without replacing anything
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. Common call-outs are for bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, across resurfaced baths, shower trays and wet room floors (ask us).
A one-year guarantee comes as standard. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Portnahaven (PA47)
- County
- Argyll and Bute
- Warranty
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need non-slip bath coating in Portnahaven?
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a picture:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Questions to ask before booking
- How the room is protected while they work
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- Whether the colour is mixed to match
FAQs for Portnahaven
What happens next?
We come back with a fixed price, generally with dates to choose from. You are under no obligation.
Do you charge for travel?
There is no separate call-out charge. Your fixed price includes everything.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Do you cover the whole of Argyll and Bute?
All of Argyll and Bute, and the rest of the UK. Travel is included in the price.
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- One-year guarantee on every repair
- We will tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- No need to remove anything
See our full price list.
Landlords, agents and businesses in Portnahaven
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and we leave the room as we found it.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Before we arrive
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
Ask for a price
If you are in Portnahaven and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
When a repair isn’t the answer
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Resurfaced baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
Prices and what affects them
We do not charge extra for travel to Portnahaven. The price depends on:
- Whether we combine several jobs
- How easy the damage is to reach
- The material and finish
- What kind of damage it is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- The material, if you know it
- A coin or ruler next to the damage for scale
- Details of any past repairs
- A wider photo showing the whole bath or shower tray
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Portnahaven and the surrounding area
Portnahaven (Gaelic: Port na h-Abhainne) is about 33 miles north of Bushmills, in Argyll and Bute. Across the PA47 area, a technician comes to you. Portnahaven is one of 118 towns and villages in Argyll and Bute we cover.
All of PA47 is within our area. From High Street, Shore Street and Church Street or a nearby road, we can come to you. Neighbouring places we cover include Bun Othan (1 mile south), Port Charlotte (6 miles north-east), Bowmore (10 miles north-east), Imeraval (12 miles east) and Port Ellen (13 miles east). Some remote addresses need extra planning, so it’s best to call first.
Local landmarks in Portnahaven
Typical jobs here are in homes near Portnahaven Church and the streets around them. Open spaces near Portnahaven include Beinn Tart a' Mhill.
Places near Portnahaven
More services for Portnahaven
About our accreditations · Every repair comes with a one-year guarantee.
